Wikipedia

Pembicaraan:Wikipedia: Perbedaan antara revisi

Pelajari lebih lanjut tentang halaman ini
Jelajahi riwayat secara interaktif
← Revisi sebelumnya
Konten dihapus Konten ditambahkan
VisualTeks wiki
Tidak ada ringkasan suntingan
Tag: Suntingan perangkat seluler Suntingan peramban seluler Suntingan seluler lanjutan
 
(41 revisi perantara oleh 29 pengguna tidak ditampilkan)
Baris 1:
{{ProyekWiki Wikipedia|class=C|importance=high}}
 
== ==
Apa sih yang dimaksudkan dengan "Ditentukan untuk menjadi ensiklopedia utama"? [[Pengguna:Leo Cahyadi|~Leo]]<sup>[[Pembicaraan pengguna:Leo Cahyadi|••bicara••]]</sup> 05:34, 8 November 2006 (UTC)
:Mungkin akan ada ensiklopedia tambahan?
Baris 7 ⟶ 10:
 
 
== Anarkis = Pengrusakan??? ==
Tips Mengkonfigurasi jaringan Ad-Hoc Wireless LAN (peer-to-peer)
Ξ June 2nd, 2008 | → | ∇ Technology, Wireless |
 
Ad-Hoc Wireless LAN
 
Model jaringan ini memungkinkan perangkat wireless berkomunikasi satu sama lain secara langsung tanpa central access point.
 
Banyak metode digunakan untuk konfigurasi jaringan Ad-Hoc, berikut adalah salah satu contoh sederhana tips dan tahapan dalam mengkonfigurasi jaringan Ad-Hoc wireless LAN.
 
1. Dibutuhkan “wireless network card” pada masing-masing komputer.
2. Masuk ke “network card properties” dan set SSID dengan nama tertentu (unique). Pastikan bahwa anda mengkonfigure SSID dengan nama yang sama untuk masing-masing komputer. Jika tidak sama, jaringan tidak akan terhubung.
3. Masuk ke “network card properties” dan set “channel” untuk jaringan wireless yang akan digunakan. Pastikan anda mengkonfigurasi channel dengan angka yang sama untuk masing-masing komputer. Jika tidak, jaringan tidak akan terhubung.
4. Set IP LAN static pada kedua komputer. Patikan anda mengkonfigurasi IP komputer tersebut dalam satu subnet dan range yang sama. Jika anda set IP pada satu komputer 192.168.1.1 255.255.255.0, pastikan komputer lainnya di set juga pada range (192.168.1.2-254).
5. Set “network card” pada mode “ad-hoc”, bukan “infrastructure”.
 
Dengan konfigurasi diatas, seharusnya jaringan ad-hoc anda sudah bisa berjalan normal.
 
Misal, salah satu PC anda terhubung ke internet, dan PC satu lagi ingin ikut/numpang dalam mengakses internet, anda bisa mengaktifkan fungsi Internet Connection Sharing (ICS) pada OS Windows, berikut tahapannya:
 
1. Aktifkan “ICS” pada PC yang memiliki koneksi internet. Catat alamat IP PC ini, yang akan menjadi komputer “host”.
2. Set “default gateway” “network card” pada PC yang kedua ke alamat IP komputer “host” (refer ke No.1).
3. Set “DNS server” untuk PC yang kedua dengan alamat IP DNS dari ISP anda.
 
Perlu diingat bahwa dengan “Internet Connection Sharing” (ICS) via ad-hoc wireless LAN, komputer “host” harus selalu “ON”, jika anda ingin PC kedua bisa mengakses internet.
 
Tahapan Test Koneksi untuk PC Windows :
 
1. Klik Start.
2. Klik Run.
3. Ketik “cmd”.
4. Ketik “ping x.x.x.x”, dimana x.x.x.x adalah alamat IP dari salah satu PC.
5. Jika “ping is successful”, maka jaringan anda sudah UP dan anda memiliki “full connectivity”
 
Selamat mencoba dan berkarya…
 
JARINGAN AD HOC DI UBUNTU !!!
 
March 7, 2010
 
Udah pada tau kan Jaringan ad hoc itu yang kaya gimana??
 
Nah langsung ajah guys, berhubung sudah saya jelasin apa itu jaringan ad hoc dan bagaimana bentuk dan kegunaanya di postingan saya sebelumnya. saya sekarang cuma mau sharing aja cara membuat jaringan ad hoc di ubuntu anda, kali ini saya buat di Ubuntu 8.04 . namun saya rasa untuk versi seterusnya caranya sama saja.
 
Oke, ikuti langkah-langkah membuat jaringan ad-hoc di ubuntu berikut ini :
 
1. Pada Panel atau biasa disebut taskbar pada windows. klik System -> Preferences -> Network Configuration.
 
Berikut tampilan dari jendela Network Configuration.
 
2. DariTab Wired, Pindah ke Tab Wireless. klik +Add.
 
Keterangan : Isi Connection Name dan SSID sesuai keinginan anda, misal : nama anda. dan rubah Mode dari Infrastructure menjadi Ad-hoc.
 
Kemudian pada ‘Wireless Security’ , Pilih Jenis Security yang anda inginkan. Disini saya tidak akan memberikan penjelasan lebih lanjut mengenai jenis-jenis security wireless. Gunakan saja ‘WPA & WPA 2 Personal‘, isikan juga Passwordnya , ingat! minimal password adalah 8 karakter.
 
Kemudian pada IPv4 Setting. Rubah Method menjadi Manual dan isikan seperti berikut ini :
 
IP Adress : 192.168.1.1
 
Netmask : 255.255.255.0
 
Nah jika sudah, Klik OK!!! Jaringan Ad-hoc anda sudah selesai di buat . tinggal Connect dan tunggu client yang akan masuk ke jaringan ad hoc anda.
 
Terima Kasih.
 
Semoga Bermanfaat.
 
== Jaringan Internet Jaman sekarang ==
 
 
''' === JARINGAN INTERNET ==='''
 
 
Internet adalah jaringan komputer yang bisa dikategorikan sebagai WAN, menghubungkan berjuta komputer diseluruh dunia, tanpa batas negara, dimana setiap orang yang memiliki komputer dapat bergabung ke dalam jaringan ini hanya dengan melakukan koneksi ke penyedia layanan internet (internet service provider / ISP) seperti Telkom Speedy, atau IndosatNet. Internet dapat diterjemahkan sebagai international networking (jaringan internasional), karena menghubungkan komputer secara internasional, atau sebagai internetworking (jaringan antar jaringan) karena menghubungkan berjuta jaringan diseluruh dunia.
 
Internet dimulai ketika Departemen Pertahanan Amerika Serikat (Department of Defense USA) membangun sebuah jaringan komputer di tahun 1969, yang diberi nama ARPANET (Advanced Research Project Agency NETwork) dengan tujuan untuk menghubungkan beberapa komputer yang berada dibeberapa universitas melakukan riset militer, terutama untuk membangun jaringan komunikasi komputer yang mampu bertahan terhadap serangan nuklir. Jaringan ini berkembang terus, semakin banyak komputer yang terlibat, dan riset disisi pengembangan perangkat lunak juga berkembang. Pada bulan Mei tahun 1974, Vinton G.Cerf dari Stanford University dan Robert E.Kahn dari Departemen Pertahanan USA, mempublikasi sebuah paper di IEEE Transaction on Communication berjudul “A Protocol for Packet Network Intercommunication”, konsep ini kemudian populer sebagai protokol TCP/IP, ketika ARPANET meng-adopsi protokol menjadi protokol standard untuk ARPANET pada tahun 1983. Pihak universitas terutama University of California at Berkeley kemudian membangun sistem operasi Berkeley Software Distribution Unix) atau BSD UNIX (dikenal dengan nama Free BSD Unix) dan pihak departemen pertahanan membiayai Bolt Baranek dan Newman (BBN) untuk meng-implementasi protokol TCP/IP pada BSD Unix untuk diterapkan pada ARPANET, dengan demikian cikal-bakal internet terbentuk.
 
Pada penghujung tahun 1983, jaringan ARPANET dibagi dua menjadi DARPANET (Defence ARPANET) dan MILNET (MILitary NETwork). Pada tahun 1985 dibentuklah jaringan NFSNET (National Science Foundation NETwork) untuk menghubungkan supercomputer yang ada diberbagai universitas di Amerika dan disambungkan dengan ARPANET. Jaringan NSFNET dikembangkan terus oleh periset perguruan tinggi. Pada tahun 1988 jaringan backbone internet ini hanya berkapasitas 56 Kbps. Walaupun pada tahun 1990 secara resmi ARPANET ditutup, namun jaringan internet yang telah terbentuk diteruskan oleh pihak universitas di Amerika dan memasukkan jaringan universitas di benua Amerika (Kanada dan Amerika Selatan) serta jaringan di Eropa menjadi bagian dari internet. Pada tahun 1992 jaringan backbone ditingkatkan ke T3 dengan kecepatan 45 Mbps, dan disekitar tahun 1995 ditingkatkan lagi menjadi OC-3 pada kecepatan 155 Mbps. Kini backbone internet berkecepatan tinggi dalam order Gbps.
 
Topologi internet pada dasarnya adalah mesh-topology, menghubungkan banyak jenis jaringan melalui sistem packet-switching, kalaupun bisa dikatakan yang menjadi pusat-nya adalah beberapa NAP (Network Access Point) yang ada di San Fransisco (Pacific Bell), di Chicago (Ameritech), New Jersey (Sprint), dan Merit Access Exchange (MAE) di San Fransisco (MAE West) dan Washington, D.C (MAE East) yang ditangani oleh MFS Datanet.
 
Walaupun tidak ada organisasi yang memiliki internet, namun ada banyak organisasi yang memelihara jaringan ini melalui penetapan standarisasi protokol, aturan-aturan, serta metoda akses. Internet Engineering Task Force (IETF) menangani masalah-masalah teknis yang timbul di internet, seperti masalah pada protokol, arsitektur dan pengoperasian internet. Internet Research Task Force (IRTF) menangani riset teknis, seperti sistem pengalamatan dan rekayasa lainnya. Internet Assigned Numbers Authority (IANA) mengatur pembagian alamat IP (IP#) ke berbagai negara dan organisasi. Internet Society (ISOC) menangani masalah administrasi dan struktur organisasi internet.
 
Badan usaha komersil kemudian menyediakan layanan akses dengan menyediakan koneksi dari komputer pengguna ke internet, dan badan ini disebut sebagai penyedia akses internet atau ISP. Beberapa ISP terkenal di dunia adalah America On Line (AOL), Australia OnLine, CompuServe, GEnie, dan Prodigy. Di Indonesia ada TelkomNet, IndosatNet, Wasantara Net, InterNux, dan sebagainya. ISP menyediakan koneksi dial-up melalui modem-telepon, koneksi wireless melalui antena WLAN, atau koneksi ADSL melalui telepon. Protokol koneksi yang digunakan adalah SLIP (Serial Line Interface Protocol) atau PPP (Point-to-Point Protocol), dimana koneksi SLIP biasanya lebih lambat dari PPP.
GAMBAR: Koneksi ke Internet
 
GAMBAR: Koneksi ke Internet
 
Secara logis jaringan internet dibagi kedalam beberapa domain, yang menurut standar IPv4 (Internet Protocol version 4) di-identifikasi melalui nomer IP 32 bit atau 4 angka biner yang dipisahkan dengan titik (seperti 192.168.10.25). Tipe domain standar antara lain:
 
* .com = organisasi komersil
* .edu = institusi pendidikan di Amerika
* .ac = institusi akademik
* .gov = institusi pemerintah
* .mil = organisasi militer
* .net = penyedia akses jaringan
* .org = organisasi non-profit
 
Disamping itu domain juga dibagi berdasarkan negara, misalnya:
 
* .au = Australia
* .ca = Kanada
* .id = Indonesia
* .jp = Jepang
* .my = Malaysia
* .sw = Swedia
* .th = Thailand
 
Sebagai contoh Universitas Islam Negeri Alauddin memiliki alamat uin-alauddin.ac.id sebagai salah satu institusi akademik di Indonesia, sebagai penyedia akses jaringan, Indosat memiliki kode alamat indosat.net.id, dan sebagainya.
 
 
Jaringan Komputer
Dasar-Dasar Jaringan Komputer
 
* Apa itu Jaringan Komputer?
* Sejarah Jaringan Komputer
* Model Komunikasi
* Komunikasi Data
* Jaringan Komunikasi data
* Protokol dan Arsitektur
 
Komponen-Komponen Jaringan
 
* Peta Jaringan Komputer
* Media Transmisi Wired
* Media Transmisi Wireless
* Network Intrface Card (NIC)
* Konektor Jaringan
* Concentrator / HUB
* Bridge / Switch
* Router
 
Protokol dan Arsitektur
 
* Apa itu Protokol Jaringan?
* Standarisasi Protokol
* OSI Reference Model / Model Referensi OSI
* Lapisan-Lapisan Menurut OSI
* TCP/IP Reference Model / Model Referensi TCP/IP
* TCP/IP Protocol Suite / Suite Protokol TCP/IP
* Aplikasi Protokol TCP/IP
o FTP, TFTP, Telnet,SMTP
o DNS, NFS, SNMP, Gopher
o WWW, Archie, Wais, Fax
o Talk, IRC, Teleconference, Network Security
o SMS, WAP, Troubleshooting TCP/IP, Diagnostic Tools
 
Data Link Control
 
sorri...cuma mau mengkritisi paragraf di bawah ini :
* Data Link Control
* Flow Control
o Stop-And-Wait Flow Control
o Sliding-Window Flow Control
* Error Detection
o Parity Check
o Cyclic Redundancy Check
* Error Correction
* Error Control
o Stop-and-Wait ARQ
o Go-Back-n ARQ
o Sekective Reject ARQ
* High-Level Data Link Control
* Struktur Frame HDLC
 
''Salah satu wacana utama di dalam Wikipedia adalah 'perusakan'/vandalisme: konyol atau menyinggung artikel situs ini. Ada banyak orang yang melakukannya hanya demi mendapatkan pengalaman mengubah halaman internet.''
Lapisan Network
 
disambung dengan
* Pengalamatann TCP/IP
* Model Operasi IP
* Header Datagram IP
* Prinsip Kerja Internet Protocol
* Struktur IP Address
* Class IP
* Address Resolution Protocol (ARP) dan Reverse ARP (RARP)
* Internet Control Message Protocol (ICMP)
* IGMP
 
''"Karena Wikipedia adalah proyek radikal yang bebas dan terbuka, ia menarik unsur '''anarkis'''," pengakuan Larry Sanger kepada Wired News. "Untungnya, banyak dari kita yang berkeinginan untuk bertahan terhadap perusakan... dan menyingkirkannya dengan segera."''
Lapisan Transport
 
pertanyaannya adalah, apakah yang dimaksud dengan anarkis disini oleh Larry dimaksudkan untuk mengkonotasikan sebuah ulah pengrusakan???
* Transmission Control Protocol
* Port dan Socket
* Protokol Data Unit TCP
* Koneksi TCP
* User Datagram Protocol
* Port UDP
* Mekanisme Protokol UDP
 
saya sedikit kutip, beberapa kata "anarki" yang juga dipakai oleh Larry :
LAN
 
:''So Wikipedia began as a good-natured anarchy, a sort of Rousseauian state of digital nature. I always took Wikipedia's anarchy to be provisional and purely for purposes of determining what the best rules, and the nature of its authority, should be. What I, and other Wikipedians, failed to realize is that our initial anarchy would be taken by the next wave of contributors as the very essence of the project--how Wikipedia was "meant" to be--even though Wikipedia could have become anything we the contributors chose to make it.'' [http://features.slashdot.org/article.pl?sid=05/04/18/164213 The Early History of Nupedia and Wikipedia: A Memoir]
* Local Area Network dan Arsitektur
* Topologi Jaringan
* Ethernet (CSMA/CD)
* Token Ring
* Fiber Distributed Data Interface (FDDI)
* LAN ATM
* Wireless LAN
 
mohon ditanggapi --[[Pengguna:HarisX|HarisX]] <sup>«[[Bicara Pengguna:HarisX|ngobrol]]»</sup> 10:37, 23 Mei 2007 (UTC)
WAN
 
* Wide Area Network
* Circuit Switching
* Packet Switching
* Asynchronous Transfer Mode
* Frame Relay
* Itegrated Service Digital Network (ISDN)
* Domain Name System
 
kok komen gue gak ditanggepin sih.. --[[Pengguna:HarisX|HarisX]] <sup>«[[Bicara Pengguna:HarisX|ngobrol]]»</sup> 17:01, 25 Mei 2007 (UTC)
== Teknik dan Konfigurasi Jaringan VLAN ==
 
:gw udah mau nanggapin Ris, tapi temanya bener2 jauh dari pengetahuan gw. Serem amat lagi, "anarki". Sorry ya.[[Pengguna:Kembangraps|Kembangraps]] 20:50, 25 Mei 2007 (UTC)
Teknik dan Konfigurasi Jaringan VLAN
 
Sepertinya Larry memang mengonotasikan anarki dengan perusakan, meskipun yang lebih tepat digunakan di wikipedia adalah vandalisme (perbuatan merusak karya). Memang anarki sering disalahpakaikan oleh pengguna bahasa. Lihat saja di berita-berita media massa, selalu muncul penggunaan "tindakan anarkis" untuk menggambarkan tindakan perusakan [[vandalisme]]. Padahal, [[anarkisme|anarki]] lebih mengarah pada tindakan antikemapanan (tanpa peraturan) atau kekacauan dalam suatu negara.
Kali ini saya mendokumentasikan tentang bagaimana mengkonfigurasi jaringan VLAN pada
network switching layer 2. Di sini saya menggunakan cisco simulator 4, meski pun kita tidak
mengakses perangkat switch secara real, konfigurasi simulator ini cukup canggih dan sangat
membantu, sayang nya ada beberapa perintah yang tidak support pada simulator tersebut, seperti
menjalankan spaning tree. Terus terang saja konfigurasi jaringan pada Network VLAN cukup
sederhana, tetapi pemahaman mendasar tentang konsep bagaimana network switching layer 2
bekerja sangat membantu anda. Ada beberapa hal yang saya ingin anda ketahui disini, agar dapat
membantu anda dalam memahami dunia networking VLAN, pastikan anda memahami konsepkonsep
dasar yang dibawah ini :
- konsep dasar TCP/IP, Broadcast domain, collision domain
- konsep dasar bagaimana switching layer 2 bekerja
- konsep dasar Spanning Tree
- konsep dasar VLAN
- Konsep dasar Trunking
- konsep VTP (Virtual Trunking Protokol)
- bagaiman VTP Server dan VTP Clien bekerja
- konsep enkapsulation ISL dan dot1Q
- Tentu saja bagaiman cara Routing antar VLAN
- Setting dasar sebuah VLAN seperti hostname, password, dan ip address
Hanya itu saja yang diperlukan untuk memahami dunia VLAN, ketika anda memahami semua
konsep dasar diatas maka sebesar apapun network VLAN yang anda bangun tidak akan menjadi
masalah, untuk tingkat pemula dan setting VLAN standart tentunya. Di sini saya tidak membahas
tentang semua konsep-konsep diatas karena untuk membahas itu semua memerlukan ruangan
tersendiri. Untuk memahami semua konsep diatas anda bisa googling di internet, OK
 
Keonaran [[Pengguna:Allan maryo djara|Allan maryo djara]] ([[Pembicaraan Pengguna:Allan maryo djara|bicara]]) 18 Januari 2021 16.49 (UTC)
Baik mari kita mulai membangun jaringan VLAN pertama kita. Pada skenario kita kali ini, VLAN
yang kita bangun terdiri dari :
- 6 buah Cisco Switch 2950 dan 1 Buah Cisco Router
- 15 Host yang masing-masing Switch terkoneksi dengan 3 host
Berikut Data lengkap Alokasi IP address dari Network VLAN yang kita bangun
Switch
name Hostname
Vlan
Members IP addres
Subnet
Mask Gateway
Switch A A_2950 VLAN 1 172.16.10.3 255.255.255.0 172.16.10.1
Host_A VLAN 2 192.168.20.2 255.255.255.0 192.168.20.1
Host_B VLAN 4 192.168.40.3 255.255.255.0 192.168.40.1
Host_C VLAN 3 192.168.30.3 255.255.255.0 192.168.30.1
Switch B B_2950 VLAN 1 172.16.10.4 255.255.255.0 172.16.10.1
Host_D VLAN 2 192.168.20.4 255.255.255.0 192.168.20.1
Host_E VLAN 5 192.168.50.3 255.255.255.0 192.168.50.1
Host_F VLAN 3 192.168.30.4 255.255.255.0 192.168.30.1
Switch C C_2950 VLAN 1 172.16.10.5 255.255.255.0 172.16.10.1
Host_G VLAN 4 192.168.40.4 255.255.255.0 192.168.40.1
Host_H VLAN 2 192.168.20.5 255.255.255.0 192.168.20.1
Host_I VLAN 5 192.168.50.4 255.255.255.0 192.168.50.1
Switch D D_2950 VLAN 1 172.16.10.6 255.255.255.0 172.16.10.1
Host_J VLAN 3 192.168.30.5 255.255.255.0 192.168.30.1
Host_K VLAN 4 192.168.40.5 255.255.255.0 192.168.40.1
Host_L VLAN 2 192.168.20.6 255.255.255.0 192.168.20.1
Switch E E_2950 VLAN 1 172.16.10.7 255.255.255.0 172.16.10.1
Host_M VLAN 5 192.168.50.5 255.255.255.0 192.168.50.1
Host_N VLAN 3 192.168.30.6 255.255.255.0 192.168.30.1
Host_O VLAN 4 192.168.40.6 255.255.255.0 192.168.40.1
Main Switch Main_Switch VLAN 1 172.16.10.2 255.255.255.0 172.16.10.1
Router
Sub
interface VLAN Gateway IP address Subnet mask
0 / 0.1 VLAN_Switch 172.16.10.1 255.255.255.0
0 / 0.2 VLAN 2 192.168.20.1 255.255.255.0
0 / 0.3 VLAN 3 192.168.30.1 255.255.255.0
0 / 0.4 VLAN 4 192.168.40.1 255.255.255.0
0 / 0.5 VLAN 5 192.168.50.1 255.255.255.0
VLAN Members VLAN ID Network
Marketing VLAN 2 192.168.20.0
Finance VLAN 3 192.168.30.0
Support VLAN 4 192.168.40.0
Operation VLAN 5 192.168.50.0
Langkah-langkah yang dilakukan dalam membangun jaringan VLAN ini adalah :
1. Design Network VLAN yang anda bangun
- Buat design network, nama group VLAN dan Alokasi Subnet IP addres pada tiap VLAN
1. Konfigurasi Router-VLAN
- Setting Hostname
- Setting Password
- Setting Subinterface
- Setting encapsulation dotlq x
- Setting ip address untuk segmentasi VLAN
2. konfigurasi MainSwitch
pada main switch yang dikofigurasi adalah
- Setting HostName
- Setting Password
- Setting IP address VLAN
- Setting Trunking pada port yang terkoneksi dengan perangkat lain
- Setting VTP Server
- Setting VTP Domain
- Setting VTP Database
- Setting nomor dan nama-nama VLAN
3. Konfigurasi Switch yang bergabung dalam VLAN
- Setting Hostname
- Setting Password
- Setting IP Address VLAN
- Setting Trunking pada port yang terkoneksi dengan perangkat lain
- Setting VTP Client
- Setting VTP Domain
- Setting Port untuk didaftarkan pada suatu VLAN
4. Verifikasi koneksi dan VLAN membership
- Melihat pada switch port mana yang sudah di daftarkan ke VLAN
- Melihat VLAN membership dari setiap switch
- Cek Koneksi dengan ping ke setiap segment network dari berbagai tempat
 
== Mirroring dan Forking ==
Sebenarnya konfigurasi VLAN cukup sederhana anda hanya mengikuti konfigurasi seperti dibawah
ini. tapi sekali lagi pemahaman mendasar tentang konsep yang berhubungan dengan VLAN seperti
trunking, protokol ISL atau IEE 802.1Q (dot1q) cukup membantu dalam trobleshooting ke depan
Mari kita mulai konfigurasi Network VLAN kita :
Gambar Topologi VLAN yang akan dibangun
 
Nasib kita sebagai bangsa pemakai teknologi dan bukan pencipta teknologi (sampai kapan?) memang menyesakkan. Memadankan [[WP:WKB|''mirroring'' dan ''forking'']] saja perlu mengerutkan kening lebih dalam, tapi gak apa-apalah daripada cuma sekadar menyerap tanpa dipadankan :)[[Pengguna:Ardianto Bahtiar|Bocah Dieng]] 05:09, 14 Juni 2007 (UTC)
Router VLAN Configuration
Router Con0 is now available
Press RETURN to get started!
Router>enable
% Incomplete command.
Router#configure terminal
% Incomplete command.
Router(config)#hostname Route_VLAN
Route_VLAN(config)#enable secret fery
Route_VLAN(config)#line console 0
Route_VLAN(config-line)#password fery
Route_VLAN(config-line)#login
Route_VLAN(config-line)#exit
Route_VLAN(config)#line vty 0 4
Route_VLAN(config-line)#password fery
Route_VLAN(config-line)#login
Route_VLAN(config-line)#exit
Route_VLAN(config)#service password-encryption
Route_VLAN(config)#interface fastethernet 0/0
Route_VLAN(config-if)#no ip address
Route_VLAN(config-if)#no shutdown
03:37:51 %LINK-3-UPDOWN: Interface Fastethernet0/0, changed state to up
03:37:51 %LINEPROTO-5-UPDOWN: Line protocol on Interface Fastethernet0/0, changed state
to up
Route_VLAN(config-if)#exit
Route_VLAN(config)#interface fastethernet 0/0.1
Route_VLAN(config-subif)#encapsulation dot1Q 1
Route_VLAN(config-subif)#ip address 172.16.10.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.2
Route_VLAN(config-subif)#encapsulation dot1Q 2
Route_VLAN(config-subif)#ip address 192.168.20.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.3
Route_VLAN(config-subif)#encapsulation dot1Q 3
Route_VLAN(config-subif)#ip address 192.168.30.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.4
Route_VLAN(config-subif)#encapsulation dot1Q 4
Route_VLAN(config-subif)#ip address 192.168.40.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.5
Route_VLAN(config-subif)#encapsulation dot1Q 5
Route_VLAN(config-subif)#ip address 192.168.50.1 255.255.255.0
Route_VLAN(config-subif)# --->CTRL+Z
Route_VLAN#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Route_VLAN#
2950 Main Switch Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname 2950-MainSwitch
2950-MainSwitch(config)#enable secret fery
2950-MainSwitch(config)#line console 0
2950-MainSwitch(config-line)#password fery
2950-MainSwitch(config-line)#login
2950-MainSwitch(config-line)#exit
2950-MainSwitch(config)#line vty 0 15
2950-MainSwitch(config-line)#password fery
2950-MainSwitch(config-line)#login
2950-MainSwitch(config-line)#exit
2950-MainSwitch(config)#service password-encryption
2950-MainSwitch(config)#interface fastethernet 0/6
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to Router-VLAN
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/1
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to A_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/2
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to B_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/3
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to C_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/11
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to D_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/12
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to E_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface VLAN 1
2950-MainSwitch(config-if)#ip address 172.16.10.2 255.255.255.0
2950-MainSwitch(config-if)#no shutdown
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#ip default-gateway 172.16.10.1
2950-MainSwitch(config)#vtp mode server
Device mode already VTP SERVER.
2950-MainSwitch(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
2950-MainSwitch(config)#exit
2950-MainSwitch#VLAN database
2950-MainSwitch(VLAN)#VLAN 2 name Marketing
VLAN 2 added:
Name: Marketing
2950-MainSwitch(VLAN)#VLAN 3 name Finance
VLAN 3 added:
Name: Finance
2950-MainSwitch(VLAN)#VLAN 4 name Support
VLAN 4 added:
Name: Support
2950-MainSwitch(VLAN)#VLAN 5 name Operation
VLAN 5 added:
Name: Operation
2950-MainSwitch(VLAN)#apply
2950-MainSwitch(VLAN)#exit
APPLY completed.
Exiting....
2950-MainSwitch#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
2 Marketing active
3 Finance active
4 Support active
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
2950-MainSwitch#
Switch A_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname A_2950
A_2950(config)#enable secret fery
A_2950(config)#line console 0
A_2950(config-line)#password fery
A_2950(config-line)#exit
A_2950(config)#line vty 0 15
A_2950(config-line)#password fery
A_2950(config-line)#exit
A_2950(config)#service password-encryption
A_2950(config)#interface VLAN 1
A_2950(config-if)#ip address 172.16.10.3 255.255.255.0
A_2950(config-if)#no shutdown
A_2950(config-if)#exit
A_2950(config)#ip default-gateway 172.16.10.1
A_2950(config)#interface fastethernet 0/1
A_2950(config-if)#description Trunking toMainSwitch_2950
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/5
A_2950(config-if)#switchport access VLAN 2
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/6
A_2950(config-if)#switchport access VLAN 4
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/7
A_2950(config-if)#switchport access VLAN 3
A_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
A_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
A_2950(config)#apply
A_2950(config)#exit
F_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
A_2950#
Switch B_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname B_2950
B_2950(config)#enable secret fery
B_2950(config)#line console 0
B_2950(config-line)#password fery
B_2950(config-line)#exit
B_2950(config)#line vty 0 15
B_2950(config-line)#password fery
B_2950(config-line)#exit
B_2950(config)#service password-encryption
B_2950(config)#interface VLAN 1
B_2950(config-if)#ip address 172.16.10.4 255.255.255.0
B_2950(config-if)#no shutdown
B_2950(config-if)#exit
B_2950(config)#ip default-gateway 172.16.10.1
B_2950(config)#interface fastethernet 0/1
B_2950(config-if)#description Trunking toMainSwitch_2950
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/5
B_2950(config-if)#switchport access VLAN 2
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/6
B_2950(config-if)#switchport access VLAN 5
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/7
B_2950(config-if)#switchport access VLAN 3
B_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
B_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
B_2950(config)#apply
B_2950(config)#exit
B_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
B_2950#
Switch C_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname C_2950
C_2950(config)#enable secret fery
C_2950(config)#line console 0
C_2950(config-line)#password fery
C_2950(config-line)#exit
C_2950(config)#line vty 0 15
C_2950(config-line)#password fery
C_2950(config-line)#exit
C_2950(config)#service password-encryption
C_2950(config)#interface VLAN 1
C_2950(config-if)#ip address 172.16.10.5 255.255.255.0
C_2950(config-if)#no shutdown
C_2950(config-if)#exit
C_2950(config)#ip default-gateway 172.16.10.1
C_2950(config)#interface fastethernet 0/1
C_2950(config-if)#description Trunking toMainSwitch_2950
C_2950(config-if)#exit
C_2950(config)#interface fastethernet 0/5
C_2950(config-if)#switchport access VLAN 4
C_2950(config-if)#exit
C_2950(config)#interface fastethernet 0/6
C_2950(config-if)#switchport access VLAN 2
C_2950(config-if)#exit
C_2950(config)#interface fastethernet 0/7
C_2950(config-if)#switchport access VLAN 5
C_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
C_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
C_2950(config)#apply
C_2950(config)#exit
C_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
C_2950#
Switch D_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname D_2950
D_2950(config)#enable secret fery
D_2950(config)#line console 0
D_2950(config-line)#password fery
D_2950(config-line)#exit
D_2950(config)#line vty 0 15
D_2950(config-line)#password fery
D_2950(config-line)#exit
D_2950(config)#service password-encryption
D_2950(config)#interface VLAN 1
D_2950(config-if)#ip address 172.16.10.6 255.255.255.0
D_2950(config-if)#no shutdown
D_2950(config-if)#exit
D_2950(config)#ip default-gateway 172.16.10.1
D_2950(config)#interface fastethernet 0/1
D_2950(config-if)#description Trunking toMainSwitch_2950
D_2950(config-if)#exit
D_2950(config)#interface fastethernet 0/5
D_2950(config-if)#switchport access VLAN 3
D_2950(config-if)#exit
D_2950(config)#interface fastethernet 0/6
D_2950(config-if)#switchport access VLAN 4
D_2950(config-if)#exit
D_2950(config)#interface fastethernet 0/7
D_2950(config-if)#switchport access VLAN 2
D_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
D_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
D_2950(config)#apply
D_2950(config)#exit
D_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
D_2950#
Switch E_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname E_2950
E_2950(config)#enable secret fery
E_2950(config)#line console 0
E_2950(config-line)#password fery
E_2950(config-line)#exit
E_2950(config)#line vty 0 15
E_2950(config-line)#password fery
E_2950(config-line)#exit
E_2950(config)#service password-encryption
E_2950(config)#interface VLAN 1
E_2950(config-if)#ip address 172.16.10.7 255.255.255.0
E_2950(config-if)#no shutdown
E_2950(config-if)#exit
E_2950(config)#ip default-gateway 172.16.10.1
E_2950(config)#interface fastethernet 0/1
E_2950(config-if)#description Trunking to MainSwitch_2950
E_2950(config-if)#exit
E_2950(config)#interface fastethernet 0/5
E_2950(config-if)#switchport access VLAN 5
E_2950(config-if)#exit
E_2950(config)#interface fastethernet 0/6
E_2950(config-if)#switchport access VLAN 3
E_2950(config-if)#exit
E_2950(config)#interface fastethernet 0/7
E_2950(config-if)#switchport access VLAN 4
E_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
E_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
E_2950(config)#apply
E_2950(config)#exit
E_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
E_2950#
Switch A_2950 Verification
A_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
A_2950>enable
Enter password: ****
% Incomplete command.
A_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
A_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname A_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 3
switchport mode access
!
interface FastEthernet0/8
 
:Ya begitulah. Ngomong2, tandatangan Anda sendiri membingungkan juga. nama penggunanya Ardianto Bahtiar tetapi tandatangannya Bocah Dieng. Kenapa tidak memakai tanda tangan Ardianto Bahtiar saja, atau memakai nama pengguna Bocah Dieng saja. [[User:Borgx|<font face="Copperplate Gothic Bold" color="#1F85FF">borgx</font>]]<sup>([[User_talk:Borgx|<font color="#003366">kirim pesan</font>]])</sup> 05:13, 14 Juni 2007 (UTC)
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.3 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
A_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/5
3 Finance active Fa0/7
4 Support active Fa0/6
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
A_2950#
Switch B_2950 Verification
B_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
B_2950>enable
Enter password: ****
% Incomplete command.
B_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
B_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname B_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 5
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 3
switchport mode access
 
Sori bos, soalnya di preferensi ada ruang nama samaran. Jadi, saya coba pakai fasilitas itu, tapi kalo bikin bingung gak apa-apa deh pake nama pengguna aja. [[Pengguna:Ardianto Bahtiar|Ardianto Bahtiar]] 05:23, 14 Juni 2007 (UTC)
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.4 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
B_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/5
3 Finance active Fa0/7
4 Support active
5 Operation active Fa0/6
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
B_2950#
Created by Fery Junaedi
28
Switch C_2950 Verification
C_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
C_2950>enable
Enter password: ****
% Incomplete command.
C_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
C_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname C_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
Created by Fery Junaedi
29
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 5
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.5 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password fery
login
line vty 0 15
password fery
login
!
end
C_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/6
3 Finance active
4 Support active Fa0/5
5 Operation active Fa0/7
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
C_2950#
Switch D_2950 Verification
D_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
D_2950>enable
Enter password: ****
% Incomplete command.
D_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
D_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname D_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 3
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.6 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
D_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/7
3 Finance active Fa0/5
4 Support active Fa0/6
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
D_2950#
Switch E_2950 Verification
E_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
Enter password: ****
% Incomplete command.
E_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
E_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname E_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 5
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 3
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.7 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
E_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active
3 Finance active Fa0/6
4 Support active Fa0/7
5 Operation active Fa0/5
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
E_2950#
Main Switch 2950 Verification
2950-MainSwitch Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
2950-MainSwitch>enable
Enter password: ****
% Incomplete command.
2950-MainSwitch#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
2950-MainSwitch#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname 2950-MainSwitch
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
 
== Wic2020 ==
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to A_2950"
switchport mode trunk
!
interface FastEthernet0/2
description "Trunking to B_2950"
switchport mode trunk
!
interface FastEthernet0/3
description "Trunking to C_2950"
switchport mode trunk
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport mode access
!
interface FastEthernet0/6
description "Trunking to Router"
switchport mode trunk
!
interface FastEthernet0/7
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
description "Trunking to D_2950"
switchport mode trunk
!
interface FastEthernet0/12
description "Trunking to E_2950"
switchport mode trunk
!
interface VLAN1
ip address 172.16.10.2 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
2950-MainSwitch#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
2 Marketing active
3 Finance active
4 Support active
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
2950-MainSwitch#
Router VLAN Verification
Route_VLAN Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
Route_VLAN>enable
Password:
% Incomplete command.
Route_VLAN#show running-config
Building configuration...
Current configuration : 625 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Route_VLAN
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
!
!
!
interface FastEthernet0/0
no ip address
 
Tolong ada yang bisa bantu bikin artikel tentang kripto. Yang belum ada di [[mata uang kripto]] [[Pengguna:Muhammad Sayyid Ibrahim|Muhammad Sayyid Ibrahim]] ([[Pembicaraan Pengguna:Muhammad Sayyid Ibrahim|bicara]]) 14 Juli 2021 05.05 (UTC)
no ip directed-broadcast
!
interface FastEthernet0/0.1
encapsulation dot1Q 1
ip address 172.16.10.1 255.255.255.0
!
interface FastEthernet0/0.2
encapsulation dot1Q 2
ip address 192.168.20.1 255.255.255.0
!
interface FastEthernet0/0.3
encapsulation dot1Q 3
ip address 192.168.30.1 255.255.255.0
!
interface FastEthernet0/0.4
encapsulation dot1Q 4
ip address 192.168.40.1 255.255.255.0
!
interface FastEthernet0/0.5
encapsulation dot1Q 5
ip address 192.168.50.1 255.255.255.0
!
interface Serial0/0
no ip address
no ip directed-broadcast
shutdown
!
interface FastEthernet0/1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0/1
no ip address
no ip directed-broadcast
shutdown
!
!
ip classless
no ip http server
!
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line aux 0
line vty 0 4
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
Route_VLAN#
Created by Fery Junaedi
47
Cek Ping dari host A di network Switch 2950
Ke host di network 192.168.30.0
C:\>ping 192.168.30.3
Ke host di network 192.168.40.0
C:\>ping 192.168.40.3
Ke host di network 192.168.50.0
C:\>ping 192.168.50.3
Untuk verifikasi selanjutnya lakukan hal yang sama dengan di atas. Coba cek ping ke setiap host
pada network yang berbeda :
- Network 192.168.20.0
- Network 192.168.30.0
- Network 192.168.40.0
- Network 192.168.50.0
Selamat anda baru saja menjalani langkah demi langkah bagaimana melakukan setting pada
Network VLAN. hanya itu saja. Mudah Bukan ???
 
== External links found that need fixing (Oktober 2023) ==
== Teknik dan Konfigurasi Jaringan VLAN ==
 
Hello fellow editors,
 
I have found one or more external links on [[Wikipedia]] that are in need of attention. Please take a moment to review the links I found and correct them on the article if necessary. I found the following problems:
; Teknik dan Konfigurasi Jaringan VLAN
*http://www.signonsandiego.com/uniontrib/20041206/news_mz1b6encyclo.html is found to be dead. Recommend adding https://web.archive.org/web/20160114101809/http://www.sandiegouniontribune.com/uniontrib/20041206/news_mz1b6encyclo.html to the original URL.
*http://en.wiki-indonesia.club/wiki/Wikipedia:Wikipedia_is_a_work_in_progress is found to be dead. Recommend adding https://web.archive.org/web/20081030013904/http://en.wiki-indonesia.club/wiki/Wikipedia:Wikipedia_is_a_work_in_progress to the original URL.
*http://www.reuters.com/article/internetNews/idUSN0819429120070708 is found to be dead. Recommend adding https://web.archive.org/web/20071121104746/http://www.reuters.com/article/internetNews/idUSN0819429120070708 to the original URL.
*http://interviews.slashdot.org/article.pl?sid=04/07/28/1351230 is found to be dead. Recommend adding https://web.archive.org/web/20151108110204/http://interviews.slashdot.org/article.pl?sid=04%2F07%2F28%2F1351230 to the original URL.
*http://www.cbsnews.com/news/wikipedia-jimmy-wales-morley-safer-60-minutes/ is found to be dead. Recommend adding https://web.archive.org/web/20181226132754/https://www.cbsnews.com/news/wikipedia-jimmy-wales-morley-safer-60-minutes/%20/ to the original URL.
*https://wikitech.wikimedia.org/wiki/Clusters is found to be dead. Recommend adding https://web.archive.org/web/20230530035605/https://wikitech.wikimedia.org/wiki/Clusters to the original URL.
*https://www.nytimes.com/2014/02/10/technology/wikipedia-vs-the-small-screen.html is found to be dead. Recommend adding https://web.archive.org/web/20230921225909/https://www.nytimes.com/2014/02/10/technology/wikipedia-vs-the-small-screen.html to the original URL.
*http://archive.aec.at/prix/ is found to be dead. Recommend adding https://web.archive.org/web/20190630155735/http://archive.aec.at/prix/ to the original URL.
*https://www.webbyawards.com/winners/2004/web/general-website/community/wikipedia/ is found to be dead. Recommend adding https://web.archive.org/web/20200614002403/https://www.webbyawards.com/winners/2004/web/general-website/community/wikipedia/ to the original URL.
*http://www.fpa.es/es/premios-princesa-de-asturias/premiados/2015-wikipedia.html?especifica=0&idCategoria=0&anio=2015&especifica=0 is found to be dead. Recommend adding https://web.archive.org/web/20210506110104/https://www.fpa.es/es/premios-princesa-de-asturias/premiados/2015-wikipedia.html?especifica=0&idCategoria=0&anio=2015&especifica=0 to the original URL.
*http://reagle.org/joseph/2010/gfc is found to be dead. Recommend adding https://web.archive.org/web/20230808035007/http://reagle.org/joseph/2010/gfc/ to the original URL.
 
When you have finished making the appropriate changes, please visit [[:m:InternetArchiveBot/FAQ|this simple FaQ]] for additional information to fix any issues with the URLs mentioned above.
Kali ini saya mendokumentasikan tentang bagaimana mengkonfigurasi jaringan VLAN pada
network switching layer 2. Di sini saya menggunakan cisco simulator 4, meski pun kita tidak
mengakses perangkat switch secara real, konfigurasi simulator ini cukup canggih dan sangat
membantu, sayang nya ada beberapa perintah yang tidak support pada simulator tersebut, seperti
menjalankan spaning tree. Terus terang saja konfigurasi jaringan pada Network VLAN cukup
sederhana, tetapi pemahaman mendasar tentang konsep bagaimana network switching layer 2
bekerja sangat membantu anda. Ada beberapa hal yang saya ingin anda ketahui disini, agar dapat
membantu anda dalam memahami dunia networking VLAN, pastikan anda memahami konsepkonsep
dasar yang dibawah ini :
- konsep dasar TCP/IP, Broadcast domain, collision domain
- konsep dasar bagaimana switching layer 2 bekerja
- konsep dasar Spanning Tree
- konsep dasar VLAN
- Konsep dasar Trunking
- konsep VTP (Virtual Trunking Protokol)
- bagaiman VTP Server dan VTP Clien bekerja
- konsep enkapsulation ISL dan dot1Q
- Tentu saja bagaiman cara Routing antar VLAN
- Setting dasar sebuah VLAN seperti hostname, password, dan ip address
Hanya itu saja yang diperlukan untuk memahami dunia VLAN, ketika anda memahami semua
konsep dasar diatas maka sebesar apapun network VLAN yang anda bangun tidak akan menjadi
masalah, untuk tingkat pemula dan setting VLAN standart tentunya. Di sini saya tidak membahas
tentang semua konsep-konsep diatas karena untuk membahas itu semua memerlukan ruangan
tersendiri. Untuk memahami semua konsep diatas anda bisa googling di internet, OK
 
This notice will only be made once for these URLs.
Baik mari kita mulai membangun jaringan VLAN pertama kita. Pada skenario kita kali ini, VLAN
yang kita bangun terdiri dari :
- 6 buah Cisco Switch 2950 dan 1 Buah Cisco Router
- 15 Host yang masing-masing Switch terkoneksi dengan 3 host
Berikut Data lengkap Alokasi IP address dari Network VLAN yang kita bangun
Switch
name Hostname
Vlan
Members IP addres
Subnet
Mask Gateway
Switch A A_2950 VLAN 1 172.16.10.3 255.255.255.0 172.16.10.1
Host_A VLAN 2 192.168.20.2 255.255.255.0 192.168.20.1
Host_B VLAN 4 192.168.40.3 255.255.255.0 192.168.40.1
Host_C VLAN 3 192.168.30.3 255.255.255.0 192.168.30.1
Switch B B_2950 VLAN 1 172.16.10.4 255.255.255.0 172.16.10.1
Host_D VLAN 2 192.168.20.4 255.255.255.0 192.168.20.1
Host_E VLAN 5 192.168.50.3 255.255.255.0 192.168.50.1
Host_F VLAN 3 192.168.30.4 255.255.255.0 192.168.30.1
Switch C C_2950 VLAN 1 172.16.10.5 255.255.255.0 172.16.10.1
Host_G VLAN 4 192.168.40.4 255.255.255.0 192.168.40.1
Host_H VLAN 2 192.168.20.5 255.255.255.0 192.168.20.1
Host_I VLAN 5 192.168.50.4 255.255.255.0 192.168.50.1
Switch D D_2950 VLAN 1 172.16.10.6 255.255.255.0 172.16.10.1
Host_J VLAN 3 192.168.30.5 255.255.255.0 192.168.30.1
Host_K VLAN 4 192.168.40.5 255.255.255.0 192.168.40.1
Host_L VLAN 2 192.168.20.6 255.255.255.0 192.168.20.1
Switch E E_2950 VLAN 1 172.16.10.7 255.255.255.0 172.16.10.1
Host_M VLAN 5 192.168.50.5 255.255.255.0 192.168.50.1
Host_N VLAN 3 192.168.30.6 255.255.255.0 192.168.30.1
Host_O VLAN 4 192.168.40.6 255.255.255.0 192.168.40.1
Main Switch Main_Switch VLAN 1 172.16.10.2 255.255.255.0 172.16.10.1
Router
Sub
interface VLAN Gateway IP address Subnet mask
0 / 0.1 VLAN_Switch 172.16.10.1 255.255.255.0
0 / 0.2 VLAN 2 192.168.20.1 255.255.255.0
0 / 0.3 VLAN 3 192.168.30.1 255.255.255.0
0 / 0.4 VLAN 4 192.168.40.1 255.255.255.0
0 / 0.5 VLAN 5 192.168.50.1 255.255.255.0
VLAN Members VLAN ID Network
Marketing VLAN 2 192.168.20.0
Finance VLAN 3 192.168.30.0
Support VLAN 4 192.168.40.0
Operation VLAN 5 192.168.50.0
Langkah-langkah yang dilakukan dalam membangun jaringan VLAN ini adalah :
1. Design Network VLAN yang anda bangun
- Buat design network, nama group VLAN dan Alokasi Subnet IP addres pada tiap VLAN
1. Konfigurasi Router-VLAN
- Setting Hostname
- Setting Password
- Setting Subinterface
- Setting encapsulation dotlq x
- Setting ip address untuk segmentasi VLAN
2. konfigurasi MainSwitch
pada main switch yang dikofigurasi adalah
- Setting HostName
- Setting Password
- Setting IP address VLAN
- Setting Trunking pada port yang terkoneksi dengan perangkat lain
- Setting VTP Server
- Setting VTP Domain
- Setting VTP Database
- Setting nomor dan nama-nama VLAN
3. Konfigurasi Switch yang bergabung dalam VLAN
- Setting Hostname
- Setting Password
- Setting IP Address VLAN
- Setting Trunking pada port yang terkoneksi dengan perangkat lain
- Setting VTP Client
- Setting VTP Domain
- Setting Port untuk didaftarkan pada suatu VLAN
4. Verifikasi koneksi dan VLAN membership
- Melihat pada switch port mana yang sudah di daftarkan ke VLAN
- Melihat VLAN membership dari setiap switch
- Cek Koneksi dengan ping ke setiap segment network dari berbagai tempat
 
Cheers.—[[User:InternetArchiveBot|'''<span style="color:darkgrey;font-family:Courier New">InternetArchiveBot</span>''']] <span style="color:green;font-family:Rockwell">([[:en:User talk:InternetArchiveBot|Melaporkan kesalahan]])</span> 21 Oktober 2023 09.06 (UTC)
Sebenarnya konfigurasi VLAN cukup sederhana anda hanya mengikuti konfigurasi seperti dibawah
ini. tapi sekali lagi pemahaman mendasar tentang konsep yang berhubungan dengan VLAN seperti
trunking, protokol ISL atau IEE 802.1Q (dot1q) cukup membantu dalam trobleshooting ke depan
Mari kita mulai konfigurasi Network VLAN kita :
Gambar Topologi VLAN yang akan dibangun
 
== External links found that need fixing (Januari 2024) ==
Router VLAN Configuration
Router Con0 is now available
Press RETURN to get started!
Router>enable
% Incomplete command.
Router#configure terminal
% Incomplete command.
Router(config)#hostname Route_VLAN
Route_VLAN(config)#enable secret fery
Route_VLAN(config)#line console 0
Route_VLAN(config-line)#password fery
Route_VLAN(config-line)#login
Route_VLAN(config-line)#exit
Route_VLAN(config)#line vty 0 4
Route_VLAN(config-line)#password fery
Route_VLAN(config-line)#login
Route_VLAN(config-line)#exit
Route_VLAN(config)#service password-encryption
Route_VLAN(config)#interface fastethernet 0/0
Route_VLAN(config-if)#no ip address
Route_VLAN(config-if)#no shutdown
03:37:51 %LINK-3-UPDOWN: Interface Fastethernet0/0, changed state to up
03:37:51 %LINEPROTO-5-UPDOWN: Line protocol on Interface Fastethernet0/0, changed state
to up
Route_VLAN(config-if)#exit
Route_VLAN(config)#interface fastethernet 0/0.1
Route_VLAN(config-subif)#encapsulation dot1Q 1
Route_VLAN(config-subif)#ip address 172.16.10.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.2
Route_VLAN(config-subif)#encapsulation dot1Q 2
Route_VLAN(config-subif)#ip address 192.168.20.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.3
Route_VLAN(config-subif)#encapsulation dot1Q 3
Route_VLAN(config-subif)#ip address 192.168.30.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.4
Route_VLAN(config-subif)#encapsulation dot1Q 4
Route_VLAN(config-subif)#ip address 192.168.40.1 255.255.255.0
Route_VLAN(config-subif)#exit
Route_VLAN(config)#interface fastethernet 0/0.5
Route_VLAN(config-subif)#encapsulation dot1Q 5
Route_VLAN(config-subif)#ip address 192.168.50.1 255.255.255.0
Route_VLAN(config-subif)# --->CTRL+Z
Route_VLAN#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
Route_VLAN#
2950 Main Switch Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname 2950-MainSwitch
2950-MainSwitch(config)#enable secret fery
2950-MainSwitch(config)#line console 0
2950-MainSwitch(config-line)#password fery
2950-MainSwitch(config-line)#login
2950-MainSwitch(config-line)#exit
2950-MainSwitch(config)#line vty 0 15
2950-MainSwitch(config-line)#password fery
2950-MainSwitch(config-line)#login
2950-MainSwitch(config-line)#exit
2950-MainSwitch(config)#service password-encryption
2950-MainSwitch(config)#interface fastethernet 0/6
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to Router-VLAN
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/1
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to A_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/2
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to B_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/3
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to C_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/11
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to D_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface fastethernet 0/12
2950-MainSwitch(config-if)#switchport mode trunk
2950-MainSwitch(config-if)#description Trunking to E_2950
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#interface VLAN 1
2950-MainSwitch(config-if)#ip address 172.16.10.2 255.255.255.0
2950-MainSwitch(config-if)#no shutdown
2950-MainSwitch(config-if)#exit
2950-MainSwitch(config)#ip default-gateway 172.16.10.1
2950-MainSwitch(config)#vtp mode server
Device mode already VTP SERVER.
2950-MainSwitch(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
2950-MainSwitch(config)#exit
2950-MainSwitch#VLAN database
2950-MainSwitch(VLAN)#VLAN 2 name Marketing
VLAN 2 added:
Name: Marketing
2950-MainSwitch(VLAN)#VLAN 3 name Finance
VLAN 3 added:
Name: Finance
2950-MainSwitch(VLAN)#VLAN 4 name Support
VLAN 4 added:
Name: Support
2950-MainSwitch(VLAN)#VLAN 5 name Operation
VLAN 5 added:
Name: Operation
2950-MainSwitch(VLAN)#apply
2950-MainSwitch(VLAN)#exit
APPLY completed.
Exiting....
2950-MainSwitch#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
2 Marketing active
3 Finance active
4 Support active
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
2950-MainSwitch#
Switch A_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname A_2950
A_2950(config)#enable secret fery
A_2950(config)#line console 0
A_2950(config-line)#password fery
A_2950(config-line)#exit
A_2950(config)#line vty 0 15
A_2950(config-line)#password fery
A_2950(config-line)#exit
A_2950(config)#service password-encryption
A_2950(config)#interface VLAN 1
A_2950(config-if)#ip address 172.16.10.3 255.255.255.0
A_2950(config-if)#no shutdown
A_2950(config-if)#exit
A_2950(config)#ip default-gateway 172.16.10.1
A_2950(config)#interface fastethernet 0/1
A_2950(config-if)#description Trunking toMainSwitch_2950
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/5
A_2950(config-if)#switchport access VLAN 2
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/6
A_2950(config-if)#switchport access VLAN 4
A_2950(config-if)#exit
A_2950(config)#interface fastethernet 0/7
A_2950(config-if)#switchport access VLAN 3
A_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
A_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
A_2950(config)#apply
A_2950(config)#exit
F_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
A_2950#
Switch B_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname B_2950
B_2950(config)#enable secret fery
B_2950(config)#line console 0
B_2950(config-line)#password fery
B_2950(config-line)#exit
B_2950(config)#line vty 0 15
B_2950(config-line)#password fery
B_2950(config-line)#exit
B_2950(config)#service password-encryption
B_2950(config)#interface VLAN 1
B_2950(config-if)#ip address 172.16.10.4 255.255.255.0
B_2950(config-if)#no shutdown
B_2950(config-if)#exit
B_2950(config)#ip default-gateway 172.16.10.1
B_2950(config)#interface fastethernet 0/1
B_2950(config-if)#description Trunking toMainSwitch_2950
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/5
B_2950(config-if)#switchport access VLAN 2
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/6
B_2950(config-if)#switchport access VLAN 5
B_2950(config-if)#exit
B_2950(config)#interface fastethernet 0/7
B_2950(config-if)#switchport access VLAN 3
B_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
B_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
B_2950(config)#apply
B_2950(config)#exit
B_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
B_2950#
Switch C_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname C_2950
C_2950(config)#enable secret fery
C_2950(config)#line console 0
C_2950(config-line)#password fery
C_2950(config-line)#exit
C_2950(config)#line vty 0 15
C_2950(config-line)#password fery
C_2950(config-line)#exit
C_2950(config)#service password-encryption
C_2950(config)#interface VLAN 1
C_2950(config-if)#ip address 172.16.10.5 255.255.255.0
C_2950(config-if)#no shutdown
C_2950(config-if)#exit
C_2950(config)#ip default-gateway 172.16.10.1
C_2950(config)#interface fastethernet 0/1
C_2950(config-if)#description Trunking toMainSwitch_2950
C_2950(config-if)#exit
C_2950(config)#interface fastethernet 0/5
C_2950(config-if)#switchport access VLAN 4
C_2950(config-if)#exit
C_2950(config)#interface fastethernet 0/6
C_2950(config-if)#switchport access VLAN 2
C_2950(config-if)#exit
C_2950(config)#interface fastethernet 0/7
C_2950(config-if)#switchport access VLAN 5
C_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
C_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
C_2950(config)#apply
C_2950(config)#exit
C_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
C_2950#
Switch D_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname D_2950
D_2950(config)#enable secret fery
D_2950(config)#line console 0
D_2950(config-line)#password fery
D_2950(config-line)#exit
D_2950(config)#line vty 0 15
D_2950(config-line)#password fery
D_2950(config-line)#exit
D_2950(config)#service password-encryption
D_2950(config)#interface VLAN 1
D_2950(config-if)#ip address 172.16.10.6 255.255.255.0
D_2950(config-if)#no shutdown
D_2950(config-if)#exit
D_2950(config)#ip default-gateway 172.16.10.1
D_2950(config)#interface fastethernet 0/1
D_2950(config-if)#description Trunking toMainSwitch_2950
D_2950(config-if)#exit
D_2950(config)#interface fastethernet 0/5
D_2950(config-if)#switchport access VLAN 3
D_2950(config-if)#exit
D_2950(config)#interface fastethernet 0/6
D_2950(config-if)#switchport access VLAN 4
D_2950(config-if)#exit
D_2950(config)#interface fastethernet 0/7
D_2950(config-if)#switchport access VLAN 2
D_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
D_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
D_2950(config)#apply
D_2950(config)#exit
D_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
D_2950#
Switch E_2950 Configuration
switch Con0 is now available
Press RETURN to get started!
switch>enable
% Incomplete command.
switch#configure terminal
% Incomplete command.
switch(config)#hostname E_2950
E_2950(config)#enable secret fery
E_2950(config)#line console 0
E_2950(config-line)#password fery
E_2950(config-line)#exit
E_2950(config)#line vty 0 15
E_2950(config-line)#password fery
E_2950(config-line)#exit
E_2950(config)#service password-encryption
E_2950(config)#interface VLAN 1
E_2950(config-if)#ip address 172.16.10.7 255.255.255.0
E_2950(config-if)#no shutdown
E_2950(config-if)#exit
E_2950(config)#ip default-gateway 172.16.10.1
E_2950(config)#interface fastethernet 0/1
E_2950(config-if)#description Trunking to MainSwitch_2950
E_2950(config-if)#exit
E_2950(config)#interface fastethernet 0/5
E_2950(config-if)#switchport access VLAN 5
E_2950(config-if)#exit
E_2950(config)#interface fastethernet 0/6
E_2950(config-if)#switchport access VLAN 3
E_2950(config-if)#exit
E_2950(config)#interface fastethernet 0/7
E_2950(config-if)#switchport access VLAN 4
E_2950(config)#vtp mode client
Aetting device to VTP CLIENT mode.
E_2950(config)#vtp domain jetcoms
Changing VTP domain name from NULL to jetcoms
E_2950(config)#apply
E_2950(config)#exit
E_2950#copy running-config startup-config
Destination filename [startup-config]?
Building configuration...
[OK]
E_2950#
Switch A_2950 Verification
A_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
A_2950>enable
Enter password: ****
% Incomplete command.
A_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
A_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname A_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 3
switchport mode access
!
interface FastEthernet0/8
 
Hello fellow editors,
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.3 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
A_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/5
3 Finance active Fa0/7
4 Support active Fa0/6
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
A_2950#
Switch B_2950 Verification
B_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
B_2950>enable
Enter password: ****
% Incomplete command.
B_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
B_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname B_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 5
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 3
switchport mode access
 
I have found one or more external links on [[Wikipedia]] that are in need of attention. Please take a moment to review the links I found and correct them on the article if necessary. I found the following problems:
!
*http://www.slweekly.com/index.cfm?do=article.details&id=37BD3969-14D1-13A2-9F5EEAF5A79E0898 is considered to be dead, however has been found to be alive. Recommend removing the dead flag from the URL.
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.4 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
B_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/5
3 Finance active Fa0/7
4 Support active
5 Operation active Fa0/6
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
B_2950#
Created by Fery Junaedi
28
Switch C_2950 Verification
C_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
C_2950>enable
Enter password: ****
% Incomplete command.
C_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
C_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname C_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
Created by Fery Junaedi
29
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 5
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.5 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password fery
login
line vty 0 15
password fery
login
!
end
C_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/6
3 Finance active
4 Support active Fa0/5
5 Operation active Fa0/7
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
C_2950#
Switch D_2950 Verification
D_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
D_2950>enable
Enter password: ****
% Incomplete command.
D_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
D_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname D_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 3
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 2
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.6 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
D_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active Fa0/7
3 Finance active Fa0/5
4 Support active Fa0/6
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
D_2950#
Switch E_2950 Verification
E_2950 Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
Enter password: ****
% Incomplete command.
E_2950#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
E_2950#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname E_2950
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to MainSwitch"
switchport mode trunk
!
interface FastEthernet0/2
switchport mode access
!
interface FastEthernet0/3
switchport mode access
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport access VLAN 5
switchport mode access
!
interface FastEthernet0/6
switchport access VLAN 3
switchport mode access
!
interface FastEthernet0/7
switchport access VLAN 4
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
switchport mode access
!
interface FastEthernet0/12
switchport mode access
!
interface VLAN1
ip address 172.16.10.7 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
E_2950#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/8, Fa0/9, Fa0/10, Fa0/11
Fa0/12
2 Marketing active
3 Finance active Fa0/6
4 Support active Fa0/7
5 Operation active Fa0/5
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
E_2950#
Main Switch 2950 Verification
2950-MainSwitch Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
2950-MainSwitch>enable
Enter password: ****
% Incomplete command.
2950-MainSwitch#ping 172.16.10.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.16.10.1, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 4/4/4 ms
2950-MainSwitch#show running-config
Building configuration...
Current configuration : 866 bytes
!
version 12.1
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname 2950-MainSwitch
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
 
When you have finished making the appropriate changes, please visit [[:m:InternetArchiveBot/FAQ|this simple FaQ]] for additional information to fix any issues with the URLs mentioned above.
ip subnet-zero
!
!
spanning-tree extend system-id
!
!
interface FastEthernet0/1
description "Trunking to A_2950"
switchport mode trunk
!
interface FastEthernet0/2
description "Trunking to B_2950"
switchport mode trunk
!
interface FastEthernet0/3
description "Trunking to C_2950"
switchport mode trunk
!
interface FastEthernet0/4
switchport mode access
!
interface FastEthernet0/5
switchport mode access
!
interface FastEthernet0/6
description "Trunking to Router"
switchport mode trunk
!
interface FastEthernet0/7
switchport mode access
!
interface FastEthernet0/8
switchport mode access
!
interface FastEthernet0/9
switchport mode access
!
interface FastEthernet0/10
switchport mode access
!
interface FastEthernet0/11
description "Trunking to D_2950"
switchport mode trunk
!
interface FastEthernet0/12
description "Trunking to E_2950"
switchport mode trunk
!
interface VLAN1
ip address 172.16.10.2 255.255.255.0
no ip route-cache
!
ip default-gateway 172.16.10.1
ip http server
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line vty 0 15
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
2950-MainSwitch#show VLAN
VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
2 Marketing active
3 Finance active
4 Support active
5 Operation active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
3 enet 100003 1500 - - - - - 0 0
4 enet 100004 1500 - - - - - 0 0
5 enet 100005 1500 - - - - - 0 0
Remote SPAN VLANs
------------------------------------------------------------------------------
Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------
2950-MainSwitch#
Router VLAN Verification
Route_VLAN Con0 is now available
Press RETURN to get started!
User Access Verification
Password:
Route_VLAN>enable
Password:
% Incomplete command.
Route_VLAN#show running-config
Building configuration...
Current configuration : 625 bytes
!
version 12.2
service timestamps debug uptime
service timestamps log uptime
service password-encryption
!
hostname Route_VLAN
!
enable secret 5 $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
!
ip subnet-zero
!
!
!
!
!
interface FastEthernet0/0
no ip address
 
This notice will only be made once for these URLs.
no ip directed-broadcast
!
interface FastEthernet0/0.1
encapsulation dot1Q 1
ip address 172.16.10.1 255.255.255.0
!
interface FastEthernet0/0.2
encapsulation dot1Q 2
ip address 192.168.20.1 255.255.255.0
!
interface FastEthernet0/0.3
encapsulation dot1Q 3
ip address 192.168.30.1 255.255.255.0
!
interface FastEthernet0/0.4
encapsulation dot1Q 4
ip address 192.168.40.1 255.255.255.0
!
interface FastEthernet0/0.5
encapsulation dot1Q 5
ip address 192.168.50.1 255.255.255.0
!
interface Serial0/0
no ip address
no ip directed-broadcast
shutdown
!
interface FastEthernet0/1
no ip address
no ip directed-broadcast
shutdown
!
interface Serial0/1
no ip address
no ip directed-broadcast
shutdown
!
!
ip classless
no ip http server
!
!
!
line con 0
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
line aux 0
line vty 0 4
password $1$u76B$IOFVJ7VxfVXYVpGDrFTcI0
login
!
end
Route_VLAN#
Created by Fery Junaedi
47
Cek Ping dari host A di network Switch 2950
Ke host di network 192.168.30.0
C:\>ping 192.168.30.3
Ke host di network 192.168.40.0
C:\>ping 192.168.40.3
Ke host di network 192.168.50.0
C:\>ping 192.168.50.3
Untuk verifikasi selanjutnya lakukan hal yang sama dengan di atas. Coba cek ping ke setiap host
pada network yang berbeda :
- Network 192.168.20.0
- Network 192.168.30.0
- Network 192.168.40.0
- Network 192.168.50.0
Selamat anda baru saja menjalani langkah demi langkah bagaimana melakukan setting pada
Network VLAN. hanya itu saja. Mudah Bukan ???
 
Cheers.—[[User:InternetArchiveBot|'''<span style="color:darkgrey;font-family:Courier New">InternetArchiveBot</span>''']] <span style="color:green;font-family:Rockwell">([[:en:User talk:InternetArchiveBot|Melaporkan kesalahan]])</span> 11 Januari 2024 00.25 (UTC)
: Contoh item 1
: Contoh item 2
Bagian baru
Diperoleh dari "https://wiki-indonesia.club/wiki/Pembicaraan:Wikipedia"
Kembali ke halaman "Wikipedia".