Templat:Convert/doc
Halaman ini perlu diterjemahkan ke bahasa Indonesia. |
Templat ini menggunakan Lua: |
Templat {{convert}} mengubah sebuah nilai pengukuran (angka × satuan) ke dalam pengukuran dengan satuan yang berbeda, dan kemudian menampilkan hasilnya dalam tampilan yang telah diformat. Daftar lengkap simbol-simbol satuan yang dikenali oleh templat dapat dilihat di sini.
Sebagai contoh:
{{convert|2|km|mi}}
→ 2 kilometer (1,2 mi) (satuan kilometer, dikonversi menjadi mil){{convert|7|mi|km}}
→ 7 mil (11 km) (satuan mil, dikonversi menjadi kilometer)
Angka dapat dibulatkan, dan satuan dapat disingkat menjadi simbol:
{{convert|2|km|mi|2|abbr=on}}
→ 2 km (1,24 mi){{convert|7|mi|km|2|abbr=on}}
→ 7 mi (11,27 km)
Rentang nilai dapat ditulis dengan menggunakan |to|...
atau |-|...
:
{{convert|2|to|5|km|mi}}
→ 2 hingga 5 kilometer (1,2 hingga 3,1 mi){{convert|2|-|5|km|mi}}
→ 2–5 kilometer (1,2–3,1 mi)
Contoh penggunaan beberapa efek:
{{convert|2|-|5|km|mi|2|abbr=on}}
→ 2–5 km (1,24–3,11 mi){{convert|2|and|5|km|mi|sigfig=3|abbr=off}}
→ 2 dan 5 kilometer (1,24 dan 3,11 mil)
Satuan yang ingin dikonversikan
Tulis satuan asal yang ingin dikonversikan dan satuan hasil konversi:
{{convert|1|lb|kg}}
→ 1 pon (0,45 kg)
- Satuan SI umumnya memperbolehkan penggunaan prefiks, seperti "m" untuk mili (10−3), dan "M" untuk mega (106)
- Untuk satuan yang menggunakan "per", gunakan "/" (garis miring). Contoh: kg/ha (lihat § satuan dengan 'per': kg/ha dan § Mata uang per satuan: $/km)
- Untuk satuan yang menggunakan tiga besaran, dll., lihat Convert-like templates
Nama satuan atau simbolnya: 1 kilogram atau 1 kg?
Secara default, satuan pertama dituliskan dalam nama satuannya, dan satuan kedua (di dalam tanda kurung) dituliskan dalam bentuk simbol satuannya (atau singkatannya):
{{convert|1|oz|kg}}
→ 1 ons (0,028 kg)
Penggunaan |abbr=in
akan menampilkan simbol untuk satuan pertama (yang ada di sisi kiri), dan nama untuk satuan kedua:
{{convert|1|oz|kg|abbr=in}}
→ 1 oz (0,028 kilogram)
Untuk menyingkat nama kedua satuan, atau tidak menggunakan singkatan/simbol sama sekali:
{{convert|1|oz|kg|abbr=on}}
→ 1 oz (0,028 kg){{convert|1|oz|kg|abbr=off}}
→ 1 ons (0,028 kilogram)
Kenyamanan: templat {{cvt}} menggunakan |abbr=on
secara default
Templat {{cvt}} sama saja dengan {{convert}}, kecuali templat itu menggunakan |abbr=on
sebagai standar. Opsi-opsi {{convert}} yang lain juga tersedia di {{cvt}}. Contoh penggunaan:
{{cvt|1|oz|kg}}
→ 1 oz (0,028 kg)
sama saja dengan:
{{convert|1|oz|kg|abbr=on}}
→ 1 oz (0,028 kg)
Adjektiva: sepanjang 10-mil
Penggunaan |adj=on
menghasilkan tanda hubung antara nilai dan nama satuan:
Perjalanan sepanjang {{convert|10|mi|km|adj=on}}.
→ Perjalanan sepanjang 10-mil (16 km).
Hasil standar, sebagai pembanding:
{{convert|10|mi|km}} sebelum tujuan.
→ 10 mil (16 km) sebelum tujuan.
|adj=on
Tidak menghasilkan tanda hubung pada simbol/singkatan dari satuan:
Paku berukuran {{convert|9|in|cm|adj=on|abbr=on}} nail
→ Paku berukuran 9 in (23 cm)
Pembulatan: 100 ft itu setara 30 m atau 30.5 m atau 30.48 m?
Berdasarkan definisi, 100 ft setara dengan 30,48 m. Tapi secara praktik, pembulatan lebih umum dijumpai dan digunakan. Ada beberapa cara untuk membulatkan.
Pembulatan standar
Secara standar (default), templat {{Convert}} akan menghasilkan konversi yang akan dibulatkan ke presisi yang sebanding dengan nilai input. Pembulatan ini dihitung dari jumlah digit setelah koma desimal — or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant digits, whichever is more precise. An exception to this is rounding temperatures (see below).
Contoh hasil pembulatan | ||
---|---|---|
Input | Hasil | Catatan |
{{convert|123|ft|m|-1}} |
123 kaki (40 m) | |
{{convert|123|ft|m}} |
123 kaki (37 m) | same output as with 0 (below) |
{{convert|123|ft|m|0}} |
123 kaki (37 m) | |
{{convert|123|ft|m|1}} |
123 kaki (37,5 m) | |
{{convert|123|ft|m|2}} |
123 kaki (37,49 m) | The more-exact value is 37.4904 m or so, which gets converted to 37 m if this parameter is not specified at all. |
{{convert|500|ft|m|-1}} |
500 kaki (150 m) | |
{{convert|500|ft|m}} |
500 kaki (150 m) | same output as with -1 (above), because the conversion factor is between 0.2 and 2 (hence, it should produce same double-zero precision (−2) as in the input value), but the conversion must produce two significant digits at a minimum (hence, a higher single-zero precision (−1) is used)
|
{{convert|500|ft|m|0}} |
500 kaki (152 m) | |
{{convert|500|ft|m|1}} |
500 kaki (152,4 m) | |
{{convert|500|ft|m|2}} |
500 kaki (152,40 m) | exact value is 152.4 m |
{{convert|500|ft|cm|-3}} |
500 kaki (15.000 cm) | |
{{convert|500|ft|cm}} |
500 kaki (15.000 cm) | same output as with -3 (above), because the conversion factor is between 20 and 200 (hence, it should decrease input value's double-zero precision (−2) by 2), but the conversion must produce two significant digits at a minimum (hence, a higher triple-zero precision (−3) is used)
|
{{convert|500|ft|cm|0}} |
500 kaki (15.240 cm) |
Convert supports four types of rounding:
Round to a given precision: use a precision number
Specify the desired precision with an integer as the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ⅟10 to the power of this integer. For instance, if the result is 8621 and the rounding parameter is "−2", 8600 will be displayed. If the result is "123.456" and the parameter is "0", 123 will be displayed. Essentially a positive or zero rounding parameter specifies the number of decimal places; a negative value specifies the number of trailing zeroes.
Round to a given number of significant figures: |sigfig=
To specify the output number to be with n significant figures use |sigfig=<number>
:
{{convert|1200|ft|m|sigfig=4}}
→ 1.200 kaki (365,8 m){{convert|1200|ft|m|sigfig=3}}
→ 1.200 kaki (366 m){{convert|1200|ft|m|sigfig=2}}
→ 1.200 kaki (370 m){{convert|1200|ft|m|sigfig=1}}
→ 1.200 kaki (400 m)
Default behavior, for comparison:
{{convert|1200|ft|m}}
→ 1.200 kaki (370 m)
Setting |sigfig=
to a value less than 1 is meaningless:
{{convert|1200|ft|m|sigfig=0}}
→ 1.200 kaki (370 m)*
Round to a multiple of 5: 15, 20, 25, ...
Using |round=5
rounds the outcome to a multiple of 5.
{{convert|10|m|ft}}
→ 10 meter (33 ft){{convert|10|m|ft|round=5}}
→ 10 meter (35 ft)
Similar: using |round=25
rounds the outcome to a multiple of 25.
{{convert|10|m|ft}}
→ 10 meter (33 ft){{convert|10|m|ft|round=25}}
→ 10 meter (25 ft)
Default behavior, for comparison:
{{convert|10|m|ft|sigfig=4}}
→ 10 meter (32,81 ft)
In a range, one can round each value individually to the default. Use |round=each
:
{{convert|10 x 200 x 3000|m|ft}}
→ 10 x 200 x 3.000 meter (33 ft × 656 ft × 9.843 ft){{convert|10 x 200 x 3000|m|ft|round=each}}
→ 10 x 200 x 3.000 meter (33 ft × 660 ft × 9.800 ft)
Round to a multiple of a given fraction: 2 3⁄16 inch
Specify the desired denominator using |frac=<some positive integer>
. (Denominator is the below-the-slash number, for example the 3 in ⅓).
{{convert|5.56|cm|in|frac=16}}
→ 556 sentimeter (218+7⁄8 in){{convert|8|cm|in|frac=4}}
→ 8 sentimeter (3+1⁄4 in)
The fraction is reduced when possible:
{{convert|8|cm|in|frac=100}}
→ 8 sentimeter (3+3⁄20 in)
Default behavior uses decimal notation:
{{convert|5.56|cm|in}}
→ 556 sentimeter (219 in)
Rounding temperatures: °C, °F and K
In temperatures, the conversion will be rounded either to the precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.
{{convert|10,000|C|F K}}
→ 10,000 °C (50,000 °F; 283,150 K){{convert|10,000.1|C|F K}}
→ 10,0001 °C (50,0002 °F; 283,1501 K){{convert|-272|C|F K}}
→ −272 °C (−457,60 °F; 1,15 K){{convert|-272|C}}
→ −272 °C (−457,60 °F){{convert|100|C|F K}}
→ 100 °C (212 °F; 373 K){{convert|0|C|F K}}
→ 0 °C (32 °F; 273 K)
The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 01 perubahan derajat Celsius is a 1,8 perubahan derajat Fahrenheit, and make the 32 degrees difference shown in (1) begin to seem off somehow.
Result (1) seems off until you set the significant figures yourself with |sigfig=
:
{{convert|10000|C|sigfig=5}}
→ 10.000 °C (18.032 °F)
or you set the precision positionally, relative to the decimal point (zero being at the decimal point):
{{convert|10000|C|0}}
→ 10.000 °C (18.032 °F)
The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into five significant output digits because of the two digits after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.
Rounding input
There is limited support for rounding the displayed input number. The rounding takes place after conversion, so the output is based on the full-precision input. This is useful when the input is produced by {{#expr:}}
or otherwise available to a higher precision than is usefully displayed, and it's desirable to avoid double-rounding.
To round the input to a specified number of digits after the decimal point, use one of the parameters:
|adj=ri0
|adj=ri1
|adj=ri2
|adj=ri3
Note that it is not possible to round above the decimal place (|adj=ri-1
). Neither is there support for significant figures, multiples of 5, or any other output-rounding feature.
The default precision is computed based on the input, so an explicit output precision must usually be supplied:
{{convert|4.14159|mi|km|adj=ri0}}
→ 414.159 mil (666.524 km) (precisions are mismatched){{convert|4.14159|mi|km|0|adj=ri0}}
→ 414.159 mil (666.524 km)
In this case, if the input were rounded before conversion, a different result would be obtained:
{{convert|{{#expr:4.14159 round 0}}|mi|km|0}}
→ 4 mil (6 km) (rounds intermediate calculation, giving a different result)
Into multiple units: 10 °C (50 °F; 283 K)
Separate the multiple output units by a space:
{{convert|10|C|F K}}
→ 10 °C (50 °F; 283 K){{convert|5|km|mi nmi}}
→ 5 kilometer (3,1 mi; 2,7 nmi)
If the output unit names contain spaces, use +
as the separator.
See also:
- For multiple-unit options like 1 ft 5 in, see § In input and § In output.
Ranges of values
A range converts two values and separates them by your choice of words and punctuation.
A range: 6 to 17 kg (13 to 37 lb)
Range indicators are entered as the second parameter (between the values). Range separators can be:
Separator | Convert | Result | Notes |
---|---|---|---|
-
|
{{convert|3|-|6|ft}}
|
3–6 kaki (0,91–1,83 m) | Input can be hyphen (-) or en dash (–), output uses en dashes |
– – (en dash)
|
{{convert|3|–|6|ft}}
|
3–6 kaki (0,91–1,83 m) | |
and
|
{{convert|3|and|6|ft}}
|
3 dan 6 kaki (0,91 dan 1,83 m) | |
&
|
{{convert|3|&|6|ft}}
|
3 &[convert: unit tak dikenal] | Same as and
|
and(-)
|
{{convert|3|and(-)|6|ft}}
|
3 dan 6 kaki (0,91–1,83 m) | |abbr=on alters the punctuation
|
and(-)|abbr=on
|
{{convert|3|and(-)|6|ft|abbr=on}}
|
3 dan 6 ft (0,91–1,83 m) | |
or
|
{{convert|3|or|6|ft}}
|
3 atau 6 kaki (0,91 atau 1,83 m) | |
to
|
{{convert|3|to|6|ft}}
|
3 hingga 6 kaki (0,91 hingga 1,83 m) | |
to(-)
|
{{convert|3|to(-)|6|ft}}
|
3 hingga 6 kaki (0,91–1,83 m) | |abbr=on alters the punctuation
|
to(-)|abbr=on
|
{{convert|3|to(-)|6|ft|abbr=on}}
|
3 hingga 6 ft (0,91–1,83 m) | |
to about
|
{{convert|3|to about|6|ft}}
|
3 hingga sekitar 6 kaki (0,91 hingga sekitar 1,83 m) | |
+/-
|
{{convert|3|+/-|6|ft}}
|
3 ± 6 kaki (0,91 ± 1,83 m) | |
± ±
|
{{convert|3|±|6|ft}}
|
3 ± 6 kaki (0,91 ± 1,83 m) | |
+
|
{{convert|3|+|6|ft}}
|
3 + 6 kaki (0,91 + 1,83 m) | |
,
|
{{convert|3|,|6|ft}}
|
3, 6 kaki (0,91, 1,83 m) | |
, and
|
{{convert|3|, and|6|ft}}
|
3, dan 6 kaki (0,91, dan 1,83 m) | |
, or
|
{{convert|3|, or|6|ft}}
|
3, atau 6 kaki (0,91, atau 1,83 m) | |
by
|
{{convert|3|by|6|ft}}
|
3 x 6 kaki (0,91 x 1,83 m) | |
x
|
{{convert|3|x|6|ft}}
|
3 x 6 kaki (0,91 m × 1,83 m) | Scientific notation.|abbr=on alters the punctuation
|
× ×
|
{{convert|3|×|6|ft}}
|
3 x 6 kaki (0,91 m × 1,83 m) | |
x|abbr=on
|
{{convert|3|x|6|ft|abbr=on}}
|
3 ft × 6 ft (0,91 m × 1,83 m) | |
xx
|
|xx| is deprecated. Use |x| instead | ||
*
|
|*| is deprecated. Use |x| instead | ||
to-
|
|to-| is deprecated. Use |to(-)| instead | ||
&
|
|&| is deprecated. Use |and| instead | ||
abbr=mos
|
|abbr=mos is deprecated. Use |x| or |by| instead |
Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)
Use by
:
{{convert|6|by|12|ft|m}}
→ 6 x 12 kaki (1,8 x 3,7 m)
Use ×
, multiplication sign, or x
, letter:
{{convert|6|x|12|m|ft}}
→ 6 x 12 meter (20 ft × 39 ft)
In science, the formal way is to set |x|
and |abbr=on
(keeping dimensions right, like in area = x km2):
{{convert|6|x|12|m|ft|abbr=on}}
→ 6 m × 12 m (20 ft × 39 ft)
Lists of values: 20, 40, or 60 miles
{{convert|20|,|40|, or|60|mi}}
→ 20, 40, atau 60 mil (32, 64, atau 97 km)
About feet, inch in ranges and multiples
While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:
{{convert|1|ft|3|in|x|3|ft|5|in|mm}}
→ 1 kaki 3 inci ([convert: unit tak dikenal])*
Default behavior, for comparison:
{{convert|1|ft|3|in|mm}}
→ 1 kaki 3 inci (380 mm)
However, converting metric units into feet and inches with |order=flip
can produce the desired output:
{{convert|380|x|1040|mm|ftin|order=flip}}
→ 1 kaki 3 inci x 3 kaki 5 inci (380 mm × 1.040 mm)
Words
Spelling of unit name: international metre or US meter?
Default spelling of units is in the en (generic) locale. To show en-US spelling, use |sp=us
:
{{convert|1|m|ft}}
→ 1 meter (3,3 ft)—default{{convert|1|m|ft|sp=us}}
→ 1 meter (3,3 ft)
Spell out numbers: ten miles
To write a number in words, use |spell=in
:
{{convert|10|mi|m|spell=in}}
→ sepuluh mil (16.000 m)
To spell out both in and out values, use |spell=on
:
{{convert|10|mi|m|spell=on}}
→ sepuluh mil (enam-belas-ribu meter)
To make first letter a capital, use |spell=In
, |spell=On
{{convert|10|mi|m|spell=In}}
→ Sepuluh mil (16.000 m){{convert|10|mi|m|spell=On}}
→ Sepuluh mil (enam-belas-ribu meter)
Remember that the spelling of the units (ft, m) is independently set by |abbr=
. To the extreme:
{{convert|10|mi|m|spell=on|abbr=off|sp=us}}
→ sepuluh mil (enam belas ribu meter)
Inserted before units: 4 planted acres
{{convert|4|acre||adj=pre|planted}}
→ 4 planted ekar (1,6 ha)
disp=preunit
is similar, but has no separator after the specified text, and can have different text for the output value:
{{convert|4|acre||disp=preunit|planted }}
→ 4 planted ekar (1,6 planted ha){{convert|4|acre||disp=preunit|planted |reforested-}}
→ 4 planted ekar (1,6 reforested-ha)
After adjective unit: A 10-kaki-long corridor
Note that two units (in this case, ft and m) are required. Use with just one unit will generate an error message.
{{convert|10|ft|m|adj=mid|-long}}
→ 10-kaki-long (3,0 m)
Plurals: 1 inch, 2 inches
The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.
{{convert|1|metre}}
→ 1 metre[convert: unit tak dikenal]{{convert|2|metre}}
→ 2 metre[convert: unit tak dikenal]{{convert|2|metre|abbr=on}}
→ 2 metre[convert: unit tak dikenal]
- Exception
Entering the unit "foot" instead of "ft" forces singular output "foot", whatever the number is.
{{convert|100|foot|abbr=off}}
→ 100 foot[convert: unit tak dikenal]
Fractions: one-eighth of an imperial pint
The convert template also supports spelling out fractions.
{{convert|3+1/2|oz|g|spell=in}}
→ tiga-and-a-perdua ons (99 g)
Any additional words needed for the fraction can also be added at the end of the template.
{{convert|1/8|imppt|ml|spell=in|adj=pre|of an}}
→ one-pertujuh of an imperial pint (71 ml)
Wrapping and line breaking
Spelling out "thousands", "millions", etc.
Most unit codes accept a prefix of e3 (thousand) or e6 (million) or e9 (billion).
{{convert|100|e6mi|e6km}}
→ 100 juta mil (160×10 6 km){{convert|120|e6acre}}
→ 120 juta ekar (49.000.000 ha){{convert|120|e6acre|e3km2}}
→ 120 juta ekar (490×10 3 km2)
To display both input and output in scientific notation, use |abbr=on
{{convert|100|e6mi|e6km|abbr=on}}
→ 100×10 6 mi (160×10 6 km)
To spell out "thousands", "millions", etc., |abbr=unit
abbreviates the unit; |abbr=off
displays both full unit names.
{{convert|100|e6mi|e6km|abbr=unit}}
→ 100 juta mi (160 juta km){{convert|100|e6mi|e6km|abbr=off}}
→ 100 juta mil (160 juta kilometer)
Numbers
Using an SI prefix: gigametre (Gm), or micrometre (μm)
Templat:Sidebar metric prefixes (small)
Units can have an SI prefix like G
before the unit: Gm
, and giga
before the name: gigametre
. These are plain multiplication factors.
To illustrate, these are trivial calculations (from metre to metre), showing the multiplication factor:
- 12 Gm (1,2×1010 m)
- 12 μm (1,2×10−5 m)
The prefix can be added before the SI unit (here: unit m
for metre):
{{convert|12|Gm|mi|abbr=on}}
→ 12 Gm (7.500.000 mi)Mm
: 12 Mm (7.500 mi)km
: 12 km (39.000 ft)mm
: 12 mm (0,47 in)μm
: 12 μm (0,012 mm)um
: 12 μm (0,012 mm) (letter "u" can be used for "μ" here)
The prefix can be used in the output unit:
{{convert|12000|mi|Mm|abbr=on}}
→ 12.000 mi (19 Mm){{convert|12|in|μm|abbr=on}}
→ 12 in (300.000 μm)
As an exception, the non-SI unit "inch" can have the "μ" prefix too:
{{convert|12|μm|μin|abbr=on}}
→ 12 μm (470 μin)
Engineering notation: 7 × 106 m
In the unit: e6m
Engineering notation can be entered as a "prefix" to the unit:
{{convert|70|e6m}}
→ 70×10 6 m (230.000.000 ft)
The same is possible for the output unit:
{{convert|23,000,000|ft|e6m}}
→ [convert: nomor tidak sah]
Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:
e3
(thousand),e6
(million),e9
(billion),e12
(trillion),e15
(quadrillion).
Scientific notation: 1.23 × 10−14
In scientific notation, a number is written like 1,23×10−14. The plain number has exactly one digit before the decimal point.
With {{convert}}, the input can be in e-notation such as 12.3e4
. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.
{{convert|12.3e-15|atm|atm|abbr=on}}
→ 123×10−15 atm (1,23×10−13 atm){{convert|0.00000005|atm|atm|abbr=on}}
→ 000.000.005 atm (5,0 atm)
Input with fractions: 1+1⁄2 inci (38,1 mm)
The number to convert can be written in fractions. Both /
(keyboard slash) and ⁄
(fraction slash) are accepted:
{{convert|1/2|in|mm|1}}
→ 1⁄2 inci (12,7 mm){{convert|1⁄2|in|mm|1}}
→ 1⁄2 inci (12,7 mm)
With positive mixed numbers (a positive integer and a fraction), use a +
sign
{{convert|2+1⁄2|in|mm|1}}
→ 2+1⁄2 inci (63,5 mm)
With negative mixed numbers, use a hyphen -
and repeat it:
{{convert|-2-1⁄2|in|mm|1}}
→ −2+1⁄2 inci (−63,5 mm)
Note that the following cases are not interpreted as mixed numbers:
{{convert|2-1⁄2|in|mm|1}}
→ 2–1⁄2 inci (50,8–12,7 mm). This is interpreted as a range from 2 inches to 1⁄2 inch.{{convert|-2+1⁄2|in|mm|1}}
→ [convert: nomor tidak sah] This is neither a mixed number nor a range, and mathematical expressions requiring calculations are not allowed here.{{convert|2+½|in|mm|1}}
→ [convert: nomor tidak sah] Fractions consisting of a single Unicode character are not allowed either.
Horizontal fraction bar: 12 inch
Using a double slash (//
) provides a horizontal fraction bar for the original (input) unit:
{{convert|1//2|in|mm|1}}
→ 1/2 inci (12,7 mm){{convert|6+3//8|in|mm|1}}
→ 6+3/8 inci (161,9 mm)
Using a negative value for |frac=
provides a horizontal fraction bar for the converted (output) unit:
{{convert|12.7|mm|frac=-2}}
→ 127 milimeter (5 in){{convert|161.9|mm|frac=-8}}
→ 1.619 milimeter (63+3/4 in)
Thousands separator: 1,000 mi or 1000 mi
In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:
{{convert|1234567|m|ft}}
→ 1.234.567 meter (4.050.417 ft){{convert|1,234,567|m|ft}}
→ [convert: nomor tidak sah]
Set |comma=off
to remove the separator from the output:
{{convert|1234567|m|ft|comma=off}}
→ 1234567 meter (4050417 ft)
Use |comma=gaps
to use digit grouping by gap (thin space) as a thousands separator:
{{convert|1234567|m|ft|comma=gaps}}
→ 1234567 meter (4050417 ft)
Default behavior, for comparison:
{{convert|1234567|m|ft}}
→ 1.234.567 meter (4.050.417 ft)
Setting |comma=5
will only add the separator when the number of digits is 5 or more:
{{convert|1234|m|ft|comma=5}}
→ 1234 meter (4049 ft){{convert|1234567|m|ft|comma=5}}
→ 1.234.567 meter (4.050.417 ft)
Default behavior, for comparison:
{{convert|1234|m|ft}}
→ 1.234 meter (4.049 ft)
Output manipulation
Brackets and separators: 10 m [33 ft]
Punctuation that distinguishes the two measurements is set by |disp=
.
Options are: b
(the default), sqbr
, comma
, or
, br
, br()
, x|…
:
{{convert|10|m|ft|disp=sqbr}}
→ 10 meter [33 ft]{{convert|10|m|ft|disp=comma}}
→ 10 meter, 33 ft{{convert|10|m|ft|disp=or}}
→ 10 meter or 33 kaki
Default behavior, for comparison:
{{convert|10|m|ft}}
→ 10 meter (33 ft)
Setting |disp=br
will force a new line (<br/>
)
{{convert|10|m|ft|disp=br}}
→ 10 meter
33 kaki
Also |disp=br()
will force a new line, and keep the brackets (useful in tables):
{{convert|10|m|ft|disp=br()}}
→ 10 meter
(33 kaki)
Setting |disp=x|…
allows any text as separator:
{{convert|10|m|ft|disp=x|_MyText_}}
→ 10 meter_MyText_33 ft (To display spaces, use
)
Flipping (reordering) the two measurements: 1.609,3 meter (1 mil)
Setting |order=flip
will flip (swap) the two measurements:
{{convert|1|mi|m|order=flip}}
→ 1.609,3 meter (1 mil)
Default behavior, for comparison:
{{convert|1|mi|m}}
→ 1 mil (1.609,3 meter)
When converting to multiple units, the effect is:
{{convert|10|km|mi nmi|order=flip}}
→ 6,2137 mil; 5,3996 mil laut (10 kilometer){{convert|10|km|nmi mi|order=flip}}
→ 5,3996 mil laut; 6,2137 mil (10 kilometer)
Fixed ordering of output units: 212 °F (100 °C; 373 K)
Setting |order=out
shows the output-units as ordered; the input unit is skipped:
{{convert|100|C|F C K|abbr=on|order=out}}
→ 212 °F (100 °C; 373 K){{convert|200|PS|kW hp|0|abbr=on|order=out}}
→ 147 kW (197 hp)
See also: § Displaying parts of the output.
Displaying parts of the result: 2 (1,5)
It is possible to display only parts of the conversion result: The following examples show how to display only a part of the result.
- Note: in Convert, abbr is synonym for unit symbol
Convert | Returns | Components |
---|---|---|
{{convert|2|cuyd|m3}}
|
2 yard kubik (1,5 m3) | all (default conversion) |
{{convert|2|cuyd|m3|abbr=on}}
|
2 cu yd (1,5 m3) | all (default conversion, abbr) |
{{convert|2|cuyd|m3|abbr=values}}
|
2 (1,5) | numbers only |
{{convert|2|cuyd|m3|disp=unit}}
|
yard kubik | input unit |
{{convert|2|cuyd|m3|disp=unit|adj=on}}
|
yard-kubik | input unit, adjectival (hyphenated) |
{{convert|2|cuyd|m3|disp=unit|adj=on|abbr=on}}
|
cu yd | input unit, adjectival (abbr so not hyphenated) |
{{convert|2|cuyd|cuyd|disp=unit}}
|
2,0 cu yd | input unit abbr (unit repeated, workaround) |
{{convert|2|cuyd|m3|disp=out}}
|
1,5 m3 | output value, symbols |
{{convert|2|cuyd|m3|disp=out|abbr=off}} |
1,5 meter kubik | output value, names |
{{convert|2|cuyd|m3|disp=out|adj=on}} |
1,5-meter-kubik | output, adjective |
{{convert|2|cuyd|m3|disp=number}} |
1,5 | output number |
{{convert|2|cuyd|m3|disp=unit2}} |
m3 | output unit (abbr by default) |
{{convert|2|cuyd|m3|disp=unit2|abbr=off}} |
meter kubik | output unit (name) |
{{convert|2|cuyd|m3|disp=unit2|abbr=on}} |
m3 | output unit (abbr) |
Display both input name and symbol: 2 kilopascals [kPa]
Setting |abbr=~
returns both name and symbol of the first (input) unit:
{{convert|2|kPa|psi|abbr=~}}
→ 2 kilopascal [kPa] (0,29 psi)A {{convert|2|kPa|psi|abbr=~|adj=on}} pressure
→ A 2-kilopascal [kPa] (0,29 psi) pressure
Table options
For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.
Enforced line break
|disp=br
adds a line-break and omits brackets.
|disp=br()
adds a line-break and does add brackets to the converted value. This may be useful in tables:
|disp=br |
|disp=br()
|
---|---|
100 kilometer 62 mil |
100 kilometer (62 mil) |
Table columns
Using {convert} in a table cell, with |disp=table
splits the result over two (or more) columns. By default units are not included in the table, however, they can be added using the |abbr=
parameter. Multiple-unit outputs, like ftin
, always output their units to the table.
{{convert|10|m|ft|disp=table}}
→
style="text-align:right;"|10
|style="text-align:right;"|33
|disp=tablecen
does the same, and also centers the text:
{{convert|20|m|ft|disp=tablecen}}
→
style="text-align:center;"|20
|style="text-align:center;"|66
The units are added as a column header:
kilograms pounds stone and pounds |disp=table
10 22 1 st 8 pon |disp=table
and|abbr=on
20 kg 44 pon 3 st 2 pon |disp=table
and|abbr=off
30 kilogram 66 pon 4 stone 10 pon |disp=tablecen
40 88 6 st 4 pon |disp=<other>
(default)50 kilogram (110 pon; 7 st 12 pon)
Sorting
Use |sortable=on
to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:
{{convert|10|m|ft|sortable=on}}
→<span data-sort-value="7001100000000000000♠"></span>10 metres (33 ft)
- showing: 10 meter (33 ft).
Use both |disp=table
and |sortable=on
together to produce table columns (pipe symbols) for each value in sortable columns:
m m ft A 15,75 m 15+3⁄4 52 B 15,5 m 155 509 C 16 m 160 520 D 16 m 16 52
The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.
Units
The conversion factors and physical constants are sourced here.
All units
Satuan dengan 'per': kg/ha, mil per galon
When using a slash (/
), a unit like kg/ha
is recognized as kilograms per hectare and will be converted in to other mass/area units. A unit in the numerator is not required.
{{convert|1000|kg/ha}}
→ 1.000 kilogram per hektare (890 pon/ekar){{convert|350|/in2}}
→ 350 per inci persegi (54/cm2)
Population density (inhabitants per square mile) can be converted using
{{convert|10|PD/sqmi|PD/km2}}
→ 10 jiwa per mil persegi (3,9/km2)
Vehicular fuel efficiency, commonly expressed in miles per gallon or litres per 100 km can also be converted
{{convert|26|mpgUS|l/100km mpgimp}}
→ 26 mil per galon AS (9,0 l/100 km; 31 mpg‑imp)
Units of difference: Expressing a change or difference in temperature
We have already discussed standard temperature conversions (°C, °F, K), as shown in these two examples:
{{convert|10|C}}
→ 10 °C (50 °F) (standard temperature conversion){{convert|10|-|15|C}}
→ 10–15 °C (50–59 °F) (standard temperature range conversion)
When expressing a temperature change (e.g., "The temperature increased by 10 °C"), or when comparing temperatures (e.g., "10 to 15 °C warmer"), we cannot use the standard temperature units (|C
, |F
and |K
), which refer to points on the respective scale. Instead, we must use one of the following "units of difference": |C-change
, |F-change
and |K-change
.
Compare the following two examples with the two above:
{{convert|10|C-change}}
→ 10 °C (18 °F) increase in temperature{{convert|10|-|15|C-change}}
→ 10–15 °C (18–27 °F) warmer than normal
To produce multiple units in the output:
{{convert|10|C-change|F-change K-change}}
→ 10 °C (18 °F; 10 K) difference
Multiple units: 1 ft 5 in
In input
Base document § Input multiples lists options for multiple unit input (like ft,in
). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):
{{convert|1|yd|2|ft|3|in}}
→ 1 yard 2 kaki 3 inci (1,60 m){{convert|2|ft|3|in|cm}}
→ 2 kaki 3 inci (69 cm){{convert|1|lb|5|oz|g}}
→ 1 pon 5 ons (600 g)
In output
Available multiple-unit output options predefined, like ftin
and ydftin
. The full list is at § Output multiples.
{{convert|2|m|ftin}}
→ 2 meter (6 ft 7 in){{convert|2|m|ft in}}
→ 2 meter (6,6 ft; 79 in), using a space, returns the decimal point
Default behavior, for comparison:
{{convert|2|m}}
→ 2 meter (6 ft 7 in)
See also:
Mata uang per satuan: $/mi → $/km
Using currency symbols in a $ per unit value, you can convert the per-unit:
{{convert|10|$/mi|$/km}}
→ $10 per mil ($6,2/km){{convert|1500|$/ozt|$/g}}
→ $1.500 per troy ons ($48/g)
You can set the currency in both values using |$=€
:
{{convert|10|$/mi|$/km|$=€}}
→ €10 per mil (€6,2/km)
It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km)
Using convert inside templates
For usage in template code, like infoboxes, {{Convert}} has these options:
- Pre-formatting fraction input
- Module:Convert/helper can read regular input and pre-format it into {{Convert}}-accepted input.
- Your template can accept
|input=16 7/8
and use {{#invoke:Convert/helper|number|16 7/8}} → Galat skrip: tidak ada modul tersebut "Convert/helper".
- Using a Wikidata property
- Adding the Wikidata property code, like code
|input=P2073
, to your template code automatically returns the Wikidata property for that article, and convert it. Both number and unit are read.
Note: to return that property value for an other article, use |qid=
.
Example for (P2073) of Cessna 208 (Q1056131):
{{convert|input=P2073|qid={{get QID|Cessna 208 Caravan}}|ftin|abbr=on}}
→ 1.500 mi (7.920.000 ft 0 in){{convert|input=P2073|qid=Q1056131|km|abbr=on}}
→ 1.500 mi (2.400 km){{convert|input=P2073|qid=Q1056131|km|abbr=on|disp=out}}
→ 2.400 km
- For example see template:Infobox Telescope.
Sometimes a property may have more than one value against it in Wikidata. You can use the |qual=
parameter to specify which of the values you want to use.
Example for diameter (P2386):
Note: this example uses |qid=Q1513315
(testing for Teleskop South Pole (Q1513315))
- primary mirror (Q613628):
{{convert|input=P2386|qual=Q613628|ft|abbr=on}}
→ 100 m (330 ft) - secondary mirror (Q1395645):
{{convert|input=P2386|qual=Q1395645|ft|abbr=on}}
→ 1 m (3,3 ft)
Parameter list
Templat:Convert/doc/parameter list
Deprecated options
Templat:Convert/doc/deprecations list
TemplateData
TemplateData untuk Convert
Converts measurements to other units.
Parameter | Keterangan | Jenis | Status | |
---|---|---|---|---|
Value | 1 | The value to convert. | Angka | wajib diisi |
From unit | 2 | The unit for the provided value.
| Kata | wajib diisi |
To units | 3 | The units to convert into. Separate units by a space for multiple outputs. In an output unit, use + for a multiplication space.
| Kata | disarankan |
Precision or suffix | 4 | Significant digits after decimal dot or, if negative, exponent of ten. | Angka | opsional |
Link units | lk | Indication of what units to apply wikilinks to. Use “on” for all, “in” for the input unit, “out” for the output units, or “off” for none of the units. For more fine-grained control over which units to link, use the template multiple times.
| Kata | opsional |
Abbreviation | abbr | Display for the units: “on” to display all units using their unit symbols, “off” to display all units in full words, “in” to display the unit symbol for the input unit, “out” to display the unit symbols for the output units, “unit” to display unit symbols for both input and output units when using scientific notation, “values” for no units at all (neither unit symbols nor full words of units).
| Kata | disarankan |
Spelling | sp | Spelling of units. Use “us” to display unit names using U.S. spelling.
| Kata | opsional |
Adjective | adj | Whether to use adjectival form. Use “on” for singular unit name appended by a hyphen, “mid” to put conversion at end, or “off” (default) for no adjectival form.
| Teks wiki tak seimbang | opsional |
Conversion | disp | Display conversion result: “or”: after ‘or’, “x”: with custom prefix and suffix, “b”: in parentheses, “table”/“tablecen”, “output only”: alone, “output number only”: alone and without unit, “unit”: not at all but input unit; if the value is a number it is used as precision.
| Kata | opsional |
Ordering | order | “flip” returns converted value first, input value second.
| Kata | opsional |
Significant figures | sigfig | Indicates the number of significant figures to be used in rounding. | Angka | opsional |
Rounding output | round | The type of rounding. “5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range. | Angka | opsional |
Thousands separator | comma | Sets or suppresses the use of thousands separators in the numbers. “off”: no separator; “gaps”: use space instead of comma as thousands separator; “5”: only add thousands separator when the integral part of the number uses 5 positions or more (10,000 or more; if using comma as thousands separator, 1234 would produce '1234', 12345 would produce '12,345').
| Boolean | opsional |
Sort key | sortable | “on” generates a hidden sort key
| Boolean | opsional |
Spell numbers? | spell | If used, spells input or input and output numbers in words, optionally capitalizing the first
| Kata | opsional |
Singular? | sing | If 'yes', uses singular form of units (deprecated)
| Boolean | usang |
Fraction? | frac | fraction as rounding unit | Angka | opsional |
Currency symbol | $ | sets currency symbol in both units
| Kata | opsional |
Mach altitude (ft) | altitude_ft | Mach (speed) depends on altitide
| Angka | opsional |
Mach altitude (m) | altitude_m | Mach (speed) depends on altitude | Angka | opsional |
WD property | input | Reads the property value of the item (article), then converts it
| Kata | opsional |